Numerical Modeling of Nitrate and Sulfate Ion Transport through a Cementitious Concrete Matrix: Case of Underground Water Reservoirs in Aggressive Environments

This study proposes a numerical model of nitrate (NO₃⁻) and sulfate (SO₄²⁻) ion transport through eight concrete formulations (F1–F8) produced using locally sourced aggregates from Brazzaville and Pointe-Noire, Republic of the Congo, and formulated with CEM II 42.5N Portland cement. Physicomechanical data, including water-accessible porosity ranging from 8.2 to 14.2% and compressive strength ranging from 22.88 to 40.43 MPa at 90 days, together with experimental ion concentrations obtained in a previous study [1], were used as input data for the inverse identification of transport parameters using the L-BFGS-B algorithm. Nitrate transport, treated as conservative to a first approximation, is described by a diffusive model based on Fick’s law, in which the effective diffusion coefficient (Deff) was the only transport parameter identified. The identified values ranged from 2.63 × 10⁻¹¹ to 8.07 × 10⁻¹¹ m²/s and exhibited a close relationship with accessible porosity. The model generally reproduced the relative ranking of the formulations; however, discrepancies of approximately 30–38% were observed for the most compact formulations (F1, F3, and F8). These discrepancies may be associated with transient phenomena not explicitly represented in the model, particularly changes in saturation and capillary effects at the beginning of exposure, which may contribute to the differences observed between simulated and experimental concentrations. For sulfates, a general one-dimensional diffusion–reaction–source model was formulated to simultaneously represent diffusive transport, interactions with the cementitious matrix, and internal contributions potentially associated with leaching. Rather than imposing a priori classification, the model parameters were independently identified for each formulation through constrained inverse optimization. Joint analysis of the identified parameters, the respective contributions of the diffusive, reaction, and source terms, and the experimental response subsequently made it possible to distinguish three operating regimes: a diffusion-dominated regime for F6, a diffusion–reaction regime for F5, and a regime dominated by a source contribution consistent with internal leaching for F1–F4, F7, and F8. These results show that inverse identification is not only a tool for estimating transport parameters. When combined with an analysis of the mechanistic contributions of the model, it also makes it possible to identify, a posteriori, the different operating regimes of ion transport in the concretes investigated and to highlight the role of microstructure in their behavior under aggressive environmental conditions.

Authors

Institutions

Publication Details

Journal
Research Square
Published
2026-11-19
DOI
https://doi.org/10.21203/rs.3.rs-11508599/v1
Primary Topic
Concrete Corrosion and Durability
Type
preprint
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
preprint

Numerical Modeling of Nitrate and Sulfate Ion Transport through a Cementitious Concrete Matrix: Case of Underground Water Reservoirs in Aggressive Environments

Narcisse Malanda, Jarlon Brunel Makela, Bienvenu Ebata-Ndion, Roland Dodji Sodjinou
Research Square
Concrete Corrosion and Durability
preprint

Numerical Modeling of Nitrate and Sulfate Ion Transport through a Cementitious Concrete Matrix: Case of Underground Water Reservoirs in Aggressive Environments

Narcisse Malanda, Jarlon Brunel Makela, Bienvenu Ebata-Ndion, Roland Dodji Sodjinou
preprint en

Abstract

This study proposes a numerical model of nitrate (NO₃⁻) and sulfate (SO₄²⁻) ion transport through eight concrete formulations (F1–F8) produced using locally sourced aggregates from Brazzaville and Pointe-Noire, Republic of the Congo, and formulated with CEM II 42.5N Portland cement. Physicomechanical data, including water-accessible porosity ranging from 8.2 to 14.2% and compressive strength ranging from 22.88 to 40.43 MPa at 90 days, together with experimental ion concentrations obtained in a previous study [1], were used as input data for the inverse identification of transport parameters using the L-BFGS-B algorithm. Nitrate transport, treated as conservative to a first approximation, is described by a diffusive model based on Fick’s law, in which the effective diffusion coefficient (Deff) was the only transport parameter identified. The identified values ranged from 2.63 × 10⁻¹¹ to 8.07 × 10⁻¹¹ m²/s and exhibited a close relationship with accessible porosity. The model generally reproduced the relative ranking of the formulations; however, discrepancies of approximately 30–38% were observed for the most compact formulations (F1, F3, and F8). These discrepancies may be associated with transient phenomena not explicitly represented in the model, particularly changes in saturation and capillary effects at the beginning of exposure, which may contribute to the differences observed between simulated and experimental concentrations. For sulfates, a general one-dimensional diffusion–reaction–source model was formulated to simultaneously represent diffusive transport, interactions with the cementitious matrix, and internal contributions potentially associated with leaching. Rather than imposing a priori classification, the model parameters were independently identified for each formulation through constrained inverse optimization. Joint analysis of the identified parameters, the respective contributions of the diffusive, reaction, and source terms, and the experimental response subsequently made it possible to distinguish three operating regimes: a diffusion-dominated regime for F6, a diffusion–reaction regime for F5, and a regime dominated by a source contribution consistent with internal leaching for F1–F4, F7, and F8. These results show that inverse identification is not only a tool for estimating transport parameters. When combined with an analysis of the mechanistic contributions of the model, it also makes it possible to identify, a posteriori, the different operating regimes of ion transport in the concretes investigated and to highlight the role of microstructure in their behavior under aggressive environmental conditions.

Research Square
Marien Ngouabi University (CG)
Concrete Corrosion and Durability
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon