Pozzolanic, filler, and biomineralization effects in lightweight foamed concrete bricks for optimizing compressive strength and carbonation resistance using definitive screening design

Foamed concrete (FC) is widely recognized for its low density and thermal insulation properties; however, its high porosity and limited durability restrict broader structural applications, while the environmental burden associated with Portland cement production necessitates the development of sustainable construction materials. This study developed bio-foamed concrete (B-FC) incorporating rice husk ash (RHA; 1%, 3%, and 5%), eggshell powder (ESP; 1%, 3%, and 5%), coffee waste (CW; 1%, 2%, and 3%), and Bacillus tequilensis (3 × 10⁵, 3 × 10⁶, and 3 × 10⁷ cells/mL) to enhance mechanical performance and carbonation resistance through the combined effects of biomineralization and pozzolanic mechanisms. Response Surface Methodology (RSM) based on Definitive Screening Design (DSD) was employed to evaluate and explore the effects of bacterial concentration, RHA, ESP, and CW on compressive strength and carbonation depth. The microstructural characteristics and phase characteristics of the developed B-FC were investigated using scanning electron microscopy (SEM) and X-ray diffraction (XRD) after 28 days of atmospheric curing. The highest experimentally measured compressive strength of 37.77 MPa was obtained at 3 × 10⁶ cells/mL of B. tequilensis, 3% ESP, 3% RHA, and 2% CW, representing a 75.37% improvement compared with FC. The minimum experimentally measured carbonation depth of 1.11 mm was obtained at 3 × 10⁵ cells/mL of B. tequilensis, 5% ESP, 5% RHA, and 1% CW, corresponding to a 50% reduction relative to FC. The RSM models predicted a maximum compressive strength of 44.45 MPa and a minimum carbonation depth of 0.3072 mm at the selected factor combinations. These values were model predictions rather than experimentally measured results, as the optimized combinations were not included among the 13 experimental runs. SEM observations showed differences in pore morphology and matrix continuity among the investigated specimens, together with visible solid deposits of different morphologies. XRD analysis revealed differences in diffraction patterns, indicating variations in the crystalline characteristics of the specimens. The improved compressive strength and reduced measured carbonation depth may be associated with the combined contributions of pozzolanic reactions, filler-related effects, and biomineralization in the developed B-FC under the investigated conditions. Furthermore, the partial replacement of Portland cement with RHA and the valorization of agricultural by-products, including ESP and CW, demonstrate the potential for agricultural-waste valorization and reduced reliance on conventional cementitious materials. Overall, integrating microbial technology with agricultural waste-derived supplementary materials shows promise for enhancing the mechanical and carbonation-related performance of B-FC under the investigated conditions.

Authors

Publication Details

Journal
Scientific Reports
Published
2026-11-19
DOI
https://doi.org/10.1038/s41598-026-81569-9
Primary Topic
Microbial Applications in Construction Materials
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Pozzolanic, filler, and biomineralization effects in lightweight foamed concrete bricks for optimizing compressive strength and carbonation resistance using definitive screening design

Raizal S.M. Rashid, Abdullah Faisal Alshalif, Mugahed Amran, Omar Alruwaythi et al.
Scientific Reports
Microbial Applications in Construction Materials
article

Pozzolanic, filler, and biomineralization effects in lightweight foamed concrete bricks for optimizing compressive strength and carbonation resistance using definitive screening design

Raizal S.M. Rashid, Abdullah Faisal Alshalif, Mugahed Amran, Omar Alruwaythi, Mahdi Mohammed Abdullah Abkar, Abdulaziz Alqurashi, Honin Al-shaeer, Mohammed Ahmed M. S. Alhudaibi
article en

Abstract

Foamed concrete (FC) is widely recognized for its low density and thermal insulation properties; however, its high porosity and limited durability restrict broader structural applications, while the environmental burden associated with Portland cement production necessitates the development of sustainable construction materials. This study developed bio-foamed concrete (B-FC) incorporating rice husk ash (RHA; 1%, 3%, and 5%), eggshell powder (ESP; 1%, 3%, and 5%), coffee waste (CW; 1%, 2%, and 3%), and Bacillus tequilensis (3 × 10⁵, 3 × 10⁶, and 3 × 10⁷ cells/mL) to enhance mechanical performance and carbonation resistance through the combined effects of biomineralization and pozzolanic mechanisms. Response Surface Methodology (RSM) based on Definitive Screening Design (DSD) was employed to evaluate and explore the effects of bacterial concentration, RHA, ESP, and CW on compressive strength and carbonation depth. The microstructural characteristics and phase characteristics of the developed B-FC were investigated using scanning electron microscopy (SEM) and X-ray diffraction (XRD) after 28 days of atmospheric curing. The highest experimentally measured compressive strength of 37.77 MPa was obtained at 3 × 10⁶ cells/mL of B. tequilensis, 3% ESP, 3% RHA, and 2% CW, representing a 75.37% improvement compared with FC. The minimum experimentally measured carbonation depth of 1.11 mm was obtained at 3 × 10⁵ cells/mL of B. tequilensis, 5% ESP, 5% RHA, and 1% CW, corresponding to a 50% reduction relative to FC. The RSM models predicted a maximum compressive strength of 44.45 MPa and a minimum carbonation depth of 0.3072 mm at the selected factor combinations. These values were model predictions rather than experimentally measured results, as the optimized combinations were not included among the 13 experimental runs. SEM observations showed differences in pore morphology and matrix continuity among the investigated specimens, together with visible solid deposits of different morphologies. XRD analysis revealed differences in diffraction patterns, indicating variations in the crystalline characteristics of the specimens. The improved compressive strength and reduced measured carbonation depth may be associated with the combined contributions of pozzolanic reactions, filler-related effects, and biomineralization in the developed B-FC under the investigated conditions. Furthermore, the partial replacement of Portland cement with RHA and the valorization of agricultural by-products, including ESP and CW, demonstrate the potential for agricultural-waste valorization and reduced reliance on conventional cementitious materials. Overall, integrating microbial technology with agricultural waste-derived supplementary materials shows promise for enhancing the mechanical and carbonation-related performance of B-FC under the investigated conditions.

Scientific Reports
Microbial Applications in Construction Materials
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon