Electrical Response of PVDF Piezoelectric Sensors to Controlled Low-Energy Impacts: Influence of Geometry and Mounting Conditions

Contact-based impact sensing is a candidate alternative to optical seed monitoring near the seed-tube outlet, where dust contamination limits optical sensors. This laboratory study quantifies how the geometry and mounting conditions of polyvinylidene fluoride (PVDF) film sensors influence two design metrics of their electrical response to repeatable controlled low-energy impacts: the peak-to-peak voltage, Upp, which governs detection-threshold robustness, and the ring-down duration, td, which limits event separability. Impacts were generated with a patented spring-driven test stand; a separate high-speed-video validation at four spring settings showed that the pre-impact kinetic energy of the impactor was repeatable to within approximately 5% (relative standard deviation). Five commercial PVDF sensors were first compared in a beam configuration (Stage I); two of them were then tested in 21 and 5 mounting variants, respectively (Stage II); and three selected configurations were characterised over nominal impact energies of 0.64–25.5 mJ (Stage III). For a single sensor, the mounting alone changed Upp from 2.6 to 22 V and td from 2.2 to 360 ms, and a foam damper shortened td by a factor of 1.6–25. In Stage III, the dependence of Upp on the nominal spring energy was described by a square-root model with an intercept (R2=0.975–0.981). The ring-down duration did not exceed 13.1 ms in the tested configurations, remaining below the assumed minimum inter-impact interval of 100 ms. Field performance, clogging detection and counting accuracy were not evaluated and are left for future work.

Authors

Institutions

Publication Details

Journal
Sensors
Published
2026-11-19
DOI
https://doi.org/10.3390/s26227329
Primary Topic
Agricultural Engineering and Mechanization
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Electrical Response of PVDF Piezoelectric Sensors to Controlled Low-Energy Impacts: Influence of Geometry and Mounting Conditions

Sławomir Sowa, Jan Szymenderski, Grzegorz Waldemar Ślaski, Łukasz Adam Gierz
Sensors
Agricultural Engineering and Mechanization
article

Electrical Response of PVDF Piezoelectric Sensors to Controlled Low-Energy Impacts: Influence of Geometry and Mounting Conditions

Sławomir Sowa, Jan Szymenderski, Grzegorz Waldemar Ślaski, Łukasz Adam Gierz
article en

Abstract

Contact-based impact sensing is a candidate alternative to optical seed monitoring near the seed-tube outlet, where dust contamination limits optical sensors. This laboratory study quantifies how the geometry and mounting conditions of polyvinylidene fluoride (PVDF) film sensors influence two design metrics of their electrical response to repeatable controlled low-energy impacts: the peak-to-peak voltage, Upp, which governs detection-threshold robustness, and the ring-down duration, td, which limits event separability. Impacts were generated with a patented spring-driven test stand; a separate high-speed-video validation at four spring settings showed that the pre-impact kinetic energy of the impactor was repeatable to within approximately 5% (relative standard deviation). Five commercial PVDF sensors were first compared in a beam configuration (Stage I); two of them were then tested in 21 and 5 mounting variants, respectively (Stage II); and three selected configurations were characterised over nominal impact energies of 0.64–25.5 mJ (Stage III). For a single sensor, the mounting alone changed Upp from 2.6 to 22 V and td from 2.2 to 360 ms, and a foam damper shortened td by a factor of 1.6–25. In Stage III, the dependence of Upp on the nominal spring energy was described by a square-root model with an intercept (R2=0.975–0.981). The ring-down duration did not exceed 13.1 ms in the tested configurations, remaining below the assumed minimum inter-impact interval of 100 ms. Field performance, clogging detection and counting accuracy were not evaluated and are left for future work.

SensorsVol. 26(22)
Poznań University of Technology (PL)
Agricultural Engineering and Mechanization
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon