Cutting Power, Surface Roughness and Sound Pressure in Circular Saw Ripsawing of Radiata Pine Plywood
Direct measurement of cutting power and surface roughness is often impractical in plywood production. This study evaluated whether mean-square sound pressure could serve as a low-cost indicator of cutting power and roughness in plywood ripsawing. Two circular saw blade configurations (Saw A, 80 teeth; Saw B, 48 teeth) were tested on radiata pine plywood of three thicknesses (12, 15, 18 mm) at three feed speeds (7.5–11.8 m/min), giving 18 conditions with cutting power, roughness (Ra, Rz) and sound pressure recorded. Cutting power was associated with blade configuration, feed speed and panel thickness, with a blade × thickness interaction (R² = 0.98; leave-one-out Q² = 0.96, repeating the choice of the interaction within each fold); thickness was confounded with panel, and modulus of elasticity did not explain variation (p = 0.30). Roughness did not differ between blades; only panel thickness was significant (p < 0.03). Sound pressure discriminated blade configuration (p < 0.001) but, pooled across blades, not thickness or feed speed. Its overall correlation with cutting power (r = 0.89) reflected separate blade clusters: within Saw A it was strong (r = 0.81), whereas within Saw B none was detected (r = − 0.35; n = 9). Sound pressure was not correlated with roughness, overall (|r| < 0.06; n = 18) or within each blade (|r| < 0.49, p > 0.18; n = 9). An exploratory single-predictor model estimated cutting power moderately within Saw A (Q² = 0.54) but failed within Saw B (Q² = −2.8); general use requires validation.
Authors
- José Luis Barros
- Alfredo Aguilera (ORCID: https://orcid.org/0000-0001-8530-9397)
Institutions
- Austral University of Chile (CL)
Publication Details
- Journal
- Research Square
- Published
- 2026-11-19
- DOI
- https://doi.org/10.21203/rs.3.rs-11623047/v1
- Primary Topic
- Advanced machining processes and optimization
- Type
- preprint