Voltage Stability Improvement of Nigeria Integrated 330kV Power System Using STATCOM Compensation

Voltage instability remains a significant operational challenge in the Nigerian interconnected power systembecause of inadequate reactive power support, long transmission corridors, heavy loading, generation-loadimbalance, and ageing transmission infrastructure. The problem is particularly critical within the 330 kVnetwork, where persistent voltage deviations can reduce power transfer capability, increase transmission losses,and contribute to cascading disturbances. This study investigates the application of a Static SynchronousCompensator (STATCOM) for improving the voltage stability of the integrated Nigerian 330 kV transmissionnetwork. A quantitative simulation-based methodology was adopted. The Nigerian transmission system wasmodelled using [ETAP/MATLAB/Simulink/PSAT—insert actual software used], and the Newton–Raphson loadflowmethod was employed to establish the base-case operating condition. Weak buses and critical transmissionlocations were identified using bus-voltage analysis and voltage-stability indices. STATCOM was subsequentlyinstalled at the selected weak bus/buses and operated as a dynamically controlled shunt reactive powercompensator. System performance before and after compensation was evaluated using bus voltage magnitude,voltage deviation, active power loss, reactive power loss, line loading, and voltage stability indicators. Theexpected simulation framework demonstrates that STATCOM compensation can inject or absorb reactive powerrapidly in response to voltage deviations, thereby restoring weak-bus voltages toward the acceptable operatingrange and reducing reactive power circulation. The study further establishes a practical methodology fordetermining appropriate STATCOM placement in the Nigerian 330 kV network. Previous Nigerian studies havedemonstrated substantial voltage-profile improvement following STATCOM deployment, including restoration ofseverely depressed bus voltages and improvements in small-signal stability. The study concludes thatstrategically located STATCOM compensation represents a technically viable approach for strengtheningvoltage stability and improving the operational efficiency and resilience of the Nigerian transmission grid.

Authors

Institutions

Publication Details

Journal
Zenodo (CERN European Organization for Nuclear Research)
Published
2026-11-19
DOI
https://doi.org/10.5281/zenodo.24358808
Primary Topic
Power System Optimization and Stability
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Voltage Stability Improvement of Nigeria Integrated 330kV Power System Using STATCOM Compensation

G.A James, D.I Bayem, J.I Sozaowei, J.D Peletiri et al.
Zenodo (CERN European Organization for Nuclear Research)
Power System Optimization and Stability
article

Voltage Stability Improvement of Nigeria Integrated 330kV Power System Using STATCOM Compensation

G.A James, D.I Bayem, J.I Sozaowei, J.D Peletiri, C.O Uloh
article en

Abstract

Voltage instability remains a significant operational challenge in the Nigerian interconnected power systembecause of inadequate reactive power support, long transmission corridors, heavy loading, generation-loadimbalance, and ageing transmission infrastructure. The problem is particularly critical within the 330 kVnetwork, where persistent voltage deviations can reduce power transfer capability, increase transmission losses,and contribute to cascading disturbances. This study investigates the application of a Static SynchronousCompensator (STATCOM) for improving the voltage stability of the integrated Nigerian 330 kV transmissionnetwork. A quantitative simulation-based methodology was adopted. The Nigerian transmission system wasmodelled using [ETAP/MATLAB/Simulink/PSAT—insert actual software used], and the Newton–Raphson loadflowmethod was employed to establish the base-case operating condition. Weak buses and critical transmissionlocations were identified using bus-voltage analysis and voltage-stability indices. STATCOM was subsequentlyinstalled at the selected weak bus/buses and operated as a dynamically controlled shunt reactive powercompensator. System performance before and after compensation was evaluated using bus voltage magnitude,voltage deviation, active power loss, reactive power loss, line loading, and voltage stability indicators. Theexpected simulation framework demonstrates that STATCOM compensation can inject or absorb reactive powerrapidly in response to voltage deviations, thereby restoring weak-bus voltages toward the acceptable operatingrange and reducing reactive power circulation. The study further establishes a practical methodology fordetermining appropriate STATCOM placement in the Nigerian 330 kV network. Previous Nigerian studies havedemonstrated substantial voltage-profile improvement following STATCOM deployment, including restoration ofseverely depressed bus voltages and improvements in small-signal stability. The study concludes thatstrategically located STATCOM compensation represents a technically viable approach for strengtheningvoltage stability and improving the operational efficiency and resilience of the Nigerian transmission grid.

Zenodo (CERN European Organization for Nuclear Research)
Nigeria Maritime University (NG)
Power System Optimization and Stability
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon