Formation and Scouring Removal of Wall-Adhered Gelled-Oil Layers in High-Water-Cut Waxy Crude Oil Pipelines Under Low-Temperature Conditions: Mechanisms and Predictive Methods

Driven by the “dual-carbon” goals, oilfield gathering and transportation systems increasingly adopt low-temperature and variable-condition operation to reduce energy consumption, thereby increasing the risks of wall adhesion and pipeline blockage during the transportation of high-water-cut waxy crude oil. However, the dynamic growth and scouring removal of wall-adhered gelled-oil layers, as well as their quantitative relationship with gelled-oil strength, remain insufficiently understood. To address these issues, eight waxy crude oils were investigated using rheological measurements, laboratory flow-loop experiments, and field pipeline tests. The effects of temperature, cumulative wax precipitation, flow shear rate, water cut, and operating time on gelled-oil yield stress and wall-layer growth were systematically examined. The effects of scouring temperature and flow velocity on layer removal were also analyzed. Predictive models for gelled-oil yield stress, wall-layer thickness, and critical scouring conditions were developed, together with software for predicting safe operating boundaries. The results showed that decreasing temperature and increasing cumulative wax precipitation significantly increased gelled-oil yield stress, whereas flow shear rate had a comparatively limited effect within the tested range. The wall-adhered layer grew rapidly during the initial stage and then gradually approached an apparent stable thickness, accompanied by an increase in wall shear stress as the effective flow area decreased. Wall-layer thickness decreased with increasing temperature, shear rate, and water cut. Increasing the water cut from 70% to 90% reduced the layer thickness after 6 h by approximately 47%. Higher scouring temperatures and flow velocities promoted gelled-oil removal. When effective scouring was defined as an increase of at least 30% in the effective flow area within 1 h, the critical scouring velocity of Sample 1 decreased from 0.62 to 0.31 m/s as the temperature increased from 26 to 34 °C. The models for yield stress, wall-layer thickness, and critical scouring conditions yielded mean relative errors of 12%, 10%, and 11%, respectively. Field evaluation using two gathering pipelines gave relative differences of 15.4% and 9.4% for the predicted limiting equivalent thicknesses, while the predicted critical scouring flow rates fell within the corresponding field-identified threshold ranges. The proposed framework quantitatively links gelled-oil strength, dynamic wall-layer growth, and critical scouring boundaries, providing a basis for predicting wall-layer thickness and determining appropriate scouring flow rates for low-temperature pipeline operation.

Authors

Institutions

Publication Details

Journal
Energies
Published
2026-11-19
DOI
https://doi.org/10.3390/en19225603
Primary Topic
Petroleum Processing and Analysis
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Formation and Scouring Removal of Wall-Adhered Gelled-Oil Layers in High-Water-Cut Waxy Crude Oil Pipelines Under Low-Temperature Conditions: Mechanisms and Predictive Methods

Hualei Yi, Xingyue Pu, Chenbo Ma, Xingwen Zhong et al.
Energies
Petroleum Processing and Analysis
article

Formation and Scouring Removal of Wall-Adhered Gelled-Oil Layers in High-Water-Cut Waxy Crude Oil Pipelines Under Low-Temperature Conditions: Mechanisms and Predictive Methods

Hualei Yi, Xingyue Pu, Chenbo Ma, Xingwen Zhong, Yijie Wang, Ping Geng, Ming Zhang
article en

Abstract

Driven by the “dual-carbon” goals, oilfield gathering and transportation systems increasingly adopt low-temperature and variable-condition operation to reduce energy consumption, thereby increasing the risks of wall adhesion and pipeline blockage during the transportation of high-water-cut waxy crude oil. However, the dynamic growth and scouring removal of wall-adhered gelled-oil layers, as well as their quantitative relationship with gelled-oil strength, remain insufficiently understood. To address these issues, eight waxy crude oils were investigated using rheological measurements, laboratory flow-loop experiments, and field pipeline tests. The effects of temperature, cumulative wax precipitation, flow shear rate, water cut, and operating time on gelled-oil yield stress and wall-layer growth were systematically examined. The effects of scouring temperature and flow velocity on layer removal were also analyzed. Predictive models for gelled-oil yield stress, wall-layer thickness, and critical scouring conditions were developed, together with software for predicting safe operating boundaries. The results showed that decreasing temperature and increasing cumulative wax precipitation significantly increased gelled-oil yield stress, whereas flow shear rate had a comparatively limited effect within the tested range. The wall-adhered layer grew rapidly during the initial stage and then gradually approached an apparent stable thickness, accompanied by an increase in wall shear stress as the effective flow area decreased. Wall-layer thickness decreased with increasing temperature, shear rate, and water cut. Increasing the water cut from 70% to 90% reduced the layer thickness after 6 h by approximately 47%. Higher scouring temperatures and flow velocities promoted gelled-oil removal. When effective scouring was defined as an increase of at least 30% in the effective flow area within 1 h, the critical scouring velocity of Sample 1 decreased from 0.62 to 0.31 m/s as the temperature increased from 26 to 34 °C. The models for yield stress, wall-layer thickness, and critical scouring conditions yielded mean relative errors of 12%, 10%, and 11%, respectively. Field evaluation using two gathering pipelines gave relative differences of 15.4% and 9.4% for the predicted limiting equivalent thicknesses, while the predicted critical scouring flow rates fell within the corresponding field-identified threshold ranges. The proposed framework quantitatively links gelled-oil strength, dynamic wall-layer growth, and critical scouring boundaries, providing a basis for predicting wall-layer thickness and determining appropriate scouring flow rates for low-temperature pipeline operation.

EnergiesVol. 19(22)
China University of Petroleum, Beijing (CN), China National Petroleum Corporation (China) (CN)
Petroleum Processing and Analysis
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon