Dynamic assessment of boundary lubrication film thickness using contact resistance techniques and its application in complex operating conditions

To enable online, quantitative monitoring of boundary lubricating film thickness in mechanical equipment under complex conditions, the contact resistance method was used for dynamic measurement, calibration, and application of lubricating film thickness. A contact resistance measurement system was developed for steel ball-steel disc point contact. Spectrum analysis, circuit design optimization, and filtering technology showed a significant decrease in the interference signals between the servo driver and the wires. The standard deviation of zero-value resistance measurement dropped to 0.087 Ω, improving the signal-to-noise ratio and contact resistance measurement resolution, resulting in an optimal film thickness measurement resolution of 7.3 nm. Contact resistance measurements were performed using PAO lubricating oils with different viscosities (60.09 mm²/s to 648.86 mm²/s) under different loads (0.5 GPa to 0.9 GPa) and rolling speeds (2 mm/s to 120 mm/s). Optical interferometry measurements were employed to establish a mathematical model to map the dynamic contact resistance to the film thickness. The model yielded a fitting R² of 0.96 and a standard deviation of 2.33 nm. The self-developed system and mathematical model were employed to assess the film-forming characteristics of the steel-steel point-contact oil-lubrication interface during low-speed reciprocating motion and continuous rotation with starved oil. With its high measurement accuracy, this system effectively captured the point of reversal in reciprocating motion. Even at zero speed, the central film thickness in the contact area remained at 8 nm, attributed to transient confinement of the lubricating oil. Moreover, under starved conditions, continuous contact resistance monitoring reliably tracked the transition from elastohydrodynamic lubrication (~60 nm) to boundary lubrication (~20 nm). This work offers valuable insights for advancing the contact resistance method from qualitative laboratory analysis to quantitative engineering applications.

Authors

Institutions

Publication Details

Journal
Measurement Science and Technology
Published
2026-11-19
DOI
https://doi.org/10.1088/1361-6501/aec46a
Primary Topic
Tribology and Lubrication Engineering
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Dynamic assessment of boundary lubrication film thickness using contact resistance techniques and its application in complex operating conditions

Jia Xin, Miao Sun, Lu Huang, Jiahui Yang
Measurement Science and Technology
Tribology and Lubrication Engineering
article

Dynamic assessment of boundary lubrication film thickness using contact resistance techniques and its application in complex operating conditions

Jia Xin, Miao Sun, Lu Huang, Jiahui Yang
article en

Abstract

To enable online, quantitative monitoring of boundary lubricating film thickness in mechanical equipment under complex conditions, the contact resistance method was used for dynamic measurement, calibration, and application of lubricating film thickness. A contact resistance measurement system was developed for steel ball-steel disc point contact. Spectrum analysis, circuit design optimization, and filtering technology showed a significant decrease in the interference signals between the servo driver and the wires. The standard deviation of zero-value resistance measurement dropped to 0.087 Ω, improving the signal-to-noise ratio and contact resistance measurement resolution, resulting in an optimal film thickness measurement resolution of 7.3 nm. Contact resistance measurements were performed using PAO lubricating oils with different viscosities (60.09 mm²/s to 648.86 mm²/s) under different loads (0.5 GPa to 0.9 GPa) and rolling speeds (2 mm/s to 120 mm/s). Optical interferometry measurements were employed to establish a mathematical model to map the dynamic contact resistance to the film thickness. The model yielded a fitting R² of 0.96 and a standard deviation of 2.33 nm. The self-developed system and mathematical model were employed to assess the film-forming characteristics of the steel-steel point-contact oil-lubrication interface during low-speed reciprocating motion and continuous rotation with starved oil. With its high measurement accuracy, this system effectively captured the point of reversal in reciprocating motion. Even at zero speed, the central film thickness in the contact area remained at 8 nm, attributed to transient confinement of the lubricating oil. Moreover, under starved conditions, continuous contact resistance monitoring reliably tracked the transition from elastohydrodynamic lubrication (~60 nm) to boundary lubrication (~20 nm). This work offers valuable insights for advancing the contact resistance method from qualitative laboratory analysis to quantitative engineering applications.

Measurement Science and Technology
National Institute of Metrology (CN)
Tribology and Lubrication Engineering
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon