Two Chlorine-Based ICP Routes to Deep, Vertical-Sidewall Trenches in InP-Based SPAD Arrays
The inductively coupled plasma (ICP) etching of deep trenches in InP was studied systematically with two gas mixtures, Cl2/CH4/H2 and Cl2/Ar. In the first mixture the sidewall profile was controlled through the CH4 and H2 flows. The optimized conditions were radio-frequency (RF) and ICP powers of 120 and 400 W, Cl2/CH4/H2 flow rates of 8/10/5 sccm (standard cubic centimeters per minute), a lower-electrode set temperature of 30 °C and a chamber pressure of 4 mTorr (millitorr). In the second mixture the Cl2/Ar flow ratio was used to balance chemical etching, ion bombardment and surface deposition. The optimized conditions were RF and ICP powers of 80 and 400 W, Cl2/Ar flow rates of 5/15 sccm, a lower-electrode set temperature of 180 °C and a chamber pressure of 1 mTorr. Under the optimized conditions, both processes produced trenches about 6 μm deep with vertical, smooth sidewalls and flat bottoms. In a 128 × 128 InP-based single-photon avalanche diode (SPAD) array with a pixel pitch of 50 μm, isolated by trenches etched with the Cl2/Ar process, the crosstalk probability at the four nearest-neighbor pixels was 12–16% at 0 °C.
Authors
- Yanli Shi (ORCID: https://orcid.org/0000-0001-9165-0997)
- Jun Wang (ORCID: https://orcid.org/0000-0002-9733-9515)
- 赵武
- Shaoyang Tan
- Liujing Li
- Li Zhou
- Hualiang Zhao
- Lichen Zhang (ORCID: https://orcid.org/0009-0006-3219-0306)
Institutions
- University of Electronic Science and Technology of China (CN)
- Yunnan University (CN)
- Everbright International (China) (CN)
Publication Details
- Journal
- Sensors
- Published
- 2026-11-19
- DOI
- https://doi.org/10.3390/s26227299
- Primary Topic
- Low-Pressure Plasma Processing and Diagnostics
- Type
- article
- Field-Weighted Citation Impact
- 0.00