Calculation of magnetic fluid flow rate during film flow in a flat gap
Purpose ‒ to investigate the dependence of the volume flow rate of a magnetic fluid in a film flow through a flat gap on the boundary velocity, and to compare this with known theoretical model. Methods . The data were obtained as part of an experiment conducted on a laboratory setup constructed using a 3D printer, supplemented with an optical system and a magnetic fluid delivery system. The use of such a system made it possible to maintain the gap height, coordinate the application of the magnetic fluid and ensure highly repeatable motion geometry. Three samples of a magnetite-kerosene-oleic acid magnetic fluid with varying concentrations were used in the experiment. The thickness of the applied magnetic fluid layer, used to calculate the flow rate, and the absorption coefficient of each sample were determined using the Bouguer – Lambert – Beer law. The absorption coefficient of the samples was obtained by illuminating wedge-shaped cells with a ferrofluid using a laser. Additionally, as part of the experiment, magnetization curves and temperature dependencies of viscosity were obtained for each sample. Results. It has been shown that the experimental data follow the relationship Q ~ v², where Q is the volumetric flow rate of the magnetic fluid and v is the boundary velocity. The nature of the dependence is preserved for all the samples used. Conclusion . It has been experimentally established that the volumetric flow rate Q of the magnetic fluid increases quadratically with an increase in the plate velocity v. The experimental relationships obtained may be useful for ultrasonic flaw detection applications, where it is important to control the thickness and flow rate of the magnetic fluid used as a contact medium. The experimental data show good agreement with the theoretical model.
Authors
- Sergey A. Somov (ORCID: https://orcid.org/0000-0002-8902-9410)
- Aleksey S. Ivanov (ORCID: https://orcid.org/0000-0003-1743-3526)
- O. S. Krylasova (ORCID: https://orcid.org/0009-0006-2997-4345)
Institutions
- Institute of Continuous Media Mechanics (RU)
Publication Details
- Journal
- Proceedings of the Southwest State University Series Engineering and Technologies
- Published
- 2026-11-18
- DOI
- https://doi.org/10.21869/2223-1528-2026-16-3-91-101
- Primary Topic
- Characterization and Applications of Magnetic Nanoparticles
- Type
- article
- Field-Weighted Citation Impact
- 0.00