Efficient adsorption of tetracycline antibiotic on modified kaolin–alginate beads synthesized with acetic acid

This investigation focused on the retention of tetracycline (TC) on acid‐treated kaolin, which was then shaped into beads using alginate. Characterization investigations of the synthesized adsorbent included determining the pHpzc. The FTIR study was applied to detect the main functional groups attached to the adsorbent. SEM images provided insights into the morphology of the materials before and after TC adsorption. The crystalline phases were examined through XRD. The textural features were assessed by BET technique. Thermal stability and decomposition patterns were investigated using thermogravimetric analysis (TGA/TDA). Differential scanning calorimetry (DSC) was conducted to identify the thermal transitions of the prepared materials. Adsorption efficacy was examined under different operational parameters. Batch experiments revealed that the prepared modified kaolin beads exhibited a strong affinity toward TC, reaching a maximum adsorption capacity of 285.87 mg·g −1 . This performance was achieved under optimized conditions: pH 6, initial TC concentration: 10 mg. L −1 , bead dose: 2 g. L −1 , agitation speed: 200 rpm, and contact time: 200 min. The equilibrium and kinetic behavior were described by the Langmuir isotherm and pseudo‐first‐order kinetic model, respectively. The calculated parameter ΔG° remained negative over the investigated temperature range, indicating thus the effect of spontaneity of TC adsorption. The thermodynamic parameters further suggested an endothermic adsorption process. The reusability of the modified kaolin gelled beads was evaluated by successive adsorption‐ desorption cycles. The adsorption efficiency gradually decreased over the cycles, reaching its lowest value in the third cycle.

Authors

Institutions

Publication Details

Journal
Environmental Progress & Sustainable Energy
Published
2026-11-18
DOI
https://doi.org/10.1002/ep.70809
Primary Topic
Adsorption and biosorption for pollutant removal
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Efficient adsorption of tetracycline antibiotic on modified kaolin–alginate beads synthesized with acetic acid

Omar Bouras, Omar Larbi Bouamrane, Amine Chami, Nassiba Moghni et al.
Environmental Progress & Sustainable Energy
Adsorption and biosorption for pollutant removal
article

Efficient adsorption of tetracycline antibiotic on modified kaolin–alginate beads synthesized with acetic acid

Omar Bouras, Omar Larbi Bouamrane, Amine Chami, Nassiba Moghni, Amel Louadj, Kaouther Ezzroug, Fouzia Gherrak
article en

Abstract

This investigation focused on the retention of tetracycline (TC) on acid‐treated kaolin, which was then shaped into beads using alginate. Characterization investigations of the synthesized adsorbent included determining the pHpzc. The FTIR study was applied to detect the main functional groups attached to the adsorbent. SEM images provided insights into the morphology of the materials before and after TC adsorption. The crystalline phases were examined through XRD. The textural features were assessed by BET technique. Thermal stability and decomposition patterns were investigated using thermogravimetric analysis (TGA/TDA). Differential scanning calorimetry (DSC) was conducted to identify the thermal transitions of the prepared materials. Adsorption efficacy was examined under different operational parameters. Batch experiments revealed that the prepared modified kaolin beads exhibited a strong affinity toward TC, reaching a maximum adsorption capacity of 285.87 mg·g −1 . This performance was achieved under optimized conditions: pH 6, initial TC concentration: 10 mg. L −1 , bead dose: 2 g. L −1 , agitation speed: 200 rpm, and contact time: 200 min. The equilibrium and kinetic behavior were described by the Langmuir isotherm and pseudo‐first‐order kinetic model, respectively. The calculated parameter ΔG° remained negative over the investigated temperature range, indicating thus the effect of spontaneity of TC adsorption. The thermodynamic parameters further suggested an endothermic adsorption process. The reusability of the modified kaolin gelled beads was evaluated by successive adsorption‐ desorption cycles. The adsorption efficiency gradually decreased over the cycles, reaching its lowest value in the third cycle.

Environmental Progress & Sustainable Energy
Centre Universitaire Morsli Abdellah de Tipaza (DZ), Centre de Recherche Scientifique et Technique en Analyses Physico-Chimiques (DZ), University of Blida (DZ)
Adsorption and biosorption for pollutant removal
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon