An Innovative Modular Vehicle Design for Different Occupant Configurations: A Case Study of a 4 × 4 Electric Scooter with Independent Suspension

Studies on electric scooters equipped with 4 × 4 independent suspension systems remain limited, and no comprehensive design approach has been reported that addresses the use of common suspension modules across different chassis and passenger configurations. In this study, a modular 4 × 4 electric scooter was converted from a single-occupant to a two-occupant configuration without modifying the existing front and rear suspension modules, and the effects of this conversion on critical vehicle design parameters were investigated. The influence of the modified vehicle geometry on steering kinematics was evaluated using the Ackermann steering principle, while the structural behavior of the chassis under different loading conditions was analyzed using the finite element method. Although the overall vehicle length increased by approximately 27% in the two-occupant configuration, the existing suspension modules remained applicable, and no wheel–chassis interference occurred at the maximum steering angle. The structural analyses showed that the changes in the center of mass and load distribution resulting from the addition of a second occupant increased the stress and deformation levels, particularly in the central and rear regions of the chassis. Nevertheless, the maximum equivalent stresses obtained for both configurations remained below the yield strength of the material, while the corresponding safety factors satisfied the recommended limits reported in the literature. The results demonstrate the adaptability of common suspension modules to different chassis configurations and highlight the importance of an integrated assessment of geometric, kinematic, and structural parameters in modular vehicle design.

Authors

Institutions

Publication Details

Journal
Machines
Published
2026-11-19
DOI
https://doi.org/10.3390/machines14111379
Primary Topic
Mechanical Engineering and Vibrations Research
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

An Innovative Modular Vehicle Design for Different Occupant Configurations: A Case Study of a 4 × 4 Electric Scooter with Independent Suspension

Mehmet Murat Topaç, Kübra Polat, Tibet Arbak
Machines
Mechanical Engineering and Vibrations Research
article

An Innovative Modular Vehicle Design for Different Occupant Configurations: A Case Study of a 4 × 4 Electric Scooter with Independent Suspension

Mehmet Murat Topaç, Kübra Polat, Tibet Arbak
article en

Abstract

Studies on electric scooters equipped with 4 × 4 independent suspension systems remain limited, and no comprehensive design approach has been reported that addresses the use of common suspension modules across different chassis and passenger configurations. In this study, a modular 4 × 4 electric scooter was converted from a single-occupant to a two-occupant configuration without modifying the existing front and rear suspension modules, and the effects of this conversion on critical vehicle design parameters were investigated. The influence of the modified vehicle geometry on steering kinematics was evaluated using the Ackermann steering principle, while the structural behavior of the chassis under different loading conditions was analyzed using the finite element method. Although the overall vehicle length increased by approximately 27% in the two-occupant configuration, the existing suspension modules remained applicable, and no wheel–chassis interference occurred at the maximum steering angle. The structural analyses showed that the changes in the center of mass and load distribution resulting from the addition of a second occupant increased the stress and deformation levels, particularly in the central and rear regions of the chassis. Nevertheless, the maximum equivalent stresses obtained for both configurations remained below the yield strength of the material, while the corresponding safety factors satisfied the recommended limits reported in the literature. The results demonstrate the adaptability of common suspension modules to different chassis configurations and highlight the importance of an integrated assessment of geometric, kinematic, and structural parameters in modular vehicle design.

MachinesVol. 14(11)
Dokuz Eylül University (TR)
Mechanical Engineering and Vibrations Research
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon