Thermo-mechanical behaviour, constitutive modelling, and processing maps of 32CrB4 steel under warm forming conditions
The decarbonization of industrial forming processes is a major challenge for large-scale steel component manufacturing. One promising strategy is the reduction of forming temperatures to lower heating energy consumption and CO₂ emissions. This study investigates the thermo-mechanical behaviour of 32CrB4 steel, a boron-alloyed material commonly used in high-strength fasteners for offshore wind turbines, under warm forming conditions (800–1100 °C, strain rates of 0.1–10 s⁻¹). Isothermal compression tests were conducted and used to develop an Arrhenius-type constitutive model, both peak-stress-based and strain-compensated, achieving a prediction accuracy with an average absolute relative error (AARE) of 5.26%. Additionally, processing maps based on the Dynamic Material Model were generated, identifying a safe and efficient forming window between 950 °C and 1000 °C at strain rates below 1 s⁻¹, where dynamic recrystallization (DRX) dominates, and flow instability is minimized. These findings provide quantitative and practical guidelines for the development of low-carbon, energy-efficient forming routes suitable for large wind turbine offshore components.
Authors
- Beatriz Achiaga (ORCID: https://orcid.org/0000-0002-5184-7944)
- Roberto Elvira (ORCID: https://orcid.org/0009-0001-0499-3420)
- Alberto Murillo-Marrodán (ORCID: https://orcid.org/0000-0001-8334-2695)
- Eduardo García (ORCID: https://orcid.org/0000-0003-2326-8977)
- Raquel Nalda Berganza
Publication Details
- Journal
- The International Journal of Advanced Manufacturing Technology
- Published
- 2026-11-20
- DOI
- https://doi.org/10.1007/s00170-026-19538-9
- Primary Topic
- Metallurgy and Material Forming
- Type
- article
- Field-Weighted Citation Impact
- 0.00