Borehole stress profiling from inversion of injection-induced fracture displacements

Knowledge of the in situ stress field and its spatial heterogeneity is essential for the safe development of the subsurface, yet most borehole-based methods resolve only part of the stress tensor or make simplifying assumptions. This study presents an improved inversion method to estimate the full stress tensor from three-dimensional fracture displacement data measured in a borehole interval during fluid injection. By combining three-dimensional displacement measurements with pressure transient analysis, the method enables stress tensor estimation from a single test. We conducted 11 injection tests and applied the method to nine test intervals along a 61 m long section of an inclined borehole at the Bedretto Underground Laboratory for Geosciences and Geoenergies (BedrettoLab), Switzerland, with an overburden of more than 1100 m. The inversion constrains the orientation of the least principal stress (S3) considerably better than those of the greatest (S1) and intermediate (S2) principal stresses, which are distributed along a girdle normal to S3 and can interchange their orientations. All inverted intervals indicate a normal faulting regime with S3 magnitudes of 8.5–15.1 MPa and S1 inclined by 15°–37° from the vertical direction. Away from the fault zone, S3 is consistent with the far-field N22°E orientation, independently determined by hydraulic fracturing stress measurements. Close to a large fault zone intersected by the borehole, S3 rotates counterclockwise by up to 68°, while the stress magnitudes vary little. The stress rotation is asymmetric and decays within 4–8 m above the fault zone but persists over 17–23 m below it, in agreement with the wider fractured zone below the fault core. Our results demonstrate that the stress inversion can resolve meter-scale stress heterogeneity around a fault zone without the need for multiple tests or assumptions on the principal stress orientations, which is relevant for the design of hydraulic stimulation and fault reactivation experiments.

Authors

Institutions

Publication Details

Journal
Research Square
Published
2026-11-19
DOI
https://doi.org/10.21203/rs.3.rs-11484543/v1
Primary Topic
Hydraulic Fracturing and Reservoir Analysis
Type
preprint
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
preprint

Borehole stress profiling from inversion of injection-induced fracture displacements

Florian Soom, Kai Bröker, Yves Guglielmi, Marian Hertrich et al.
Research Square
Hydraulic Fracturing and Reservoir Analysis
preprint

Borehole stress profiling from inversion of injection-induced fracture displacements

Florian Soom, Kai Bröker, Yves Guglielmi, Marian Hertrich, Benoît Valley, Paul Cook
preprint en

Abstract

Knowledge of the in situ stress field and its spatial heterogeneity is essential for the safe development of the subsurface, yet most borehole-based methods resolve only part of the stress tensor or make simplifying assumptions. This study presents an improved inversion method to estimate the full stress tensor from three-dimensional fracture displacement data measured in a borehole interval during fluid injection. By combining three-dimensional displacement measurements with pressure transient analysis, the method enables stress tensor estimation from a single test. We conducted 11 injection tests and applied the method to nine test intervals along a 61 m long section of an inclined borehole at the Bedretto Underground Laboratory for Geosciences and Geoenergies (BedrettoLab), Switzerland, with an overburden of more than 1100 m. The inversion constrains the orientation of the least principal stress (S3) considerably better than those of the greatest (S1) and intermediate (S2) principal stresses, which are distributed along a girdle normal to S3 and can interchange their orientations. All inverted intervals indicate a normal faulting regime with S3 magnitudes of 8.5–15.1 MPa and S1 inclined by 15°–37° from the vertical direction. Away from the fault zone, S3 is consistent with the far-field N22°E orientation, independently determined by hydraulic fracturing stress measurements. Close to a large fault zone intersected by the borehole, S3 rotates counterclockwise by up to 68°, while the stress magnitudes vary little. The stress rotation is asymmetric and decays within 4–8 m above the fault zone but persists over 17–23 m below it, in agreement with the wider fractured zone below the fault core. Our results demonstrate that the stress inversion can resolve meter-scale stress heterogeneity around a fault zone without the need for multiple tests or assumptions on the principal stress orientations, which is relevant for the design of hydraulic stimulation and fault reactivation experiments.

Research Square
Lawrence Berkeley National Laboratory (US), ETH Zurich (CH), University of Neuchâtel (CH)
Hydraulic Fracturing and Reservoir Analysis
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon