Green Synthesis and Characterization of Copper and Copper/Zinc Nanoparticles Using Moringa oleifera Lam. Extract

The green synthesis of metallic nanoparticles using plant extracts has been investigated as an alternative to conventional chemical routes. In this study, copper-containing nanoparticles (CuNPs) and copper- and zinc-containing nanoparticles (CuZnNPs) were synthesized by adding an aqueous leaf decoction of Moringa oleifera Lam. to precursor solutions of CuSO4 (CuNPs) or CuSO4 and ZnSO4 (CuZnNPs). The materials were characterized by field-emission gun scanning electron microscopy (FEG-SEM), energy-dispersive X-ray spectroscopy (EDS), energy-dispersive X-ray fluorescence (EDXRF), inductively coupled plasma optical emission spectrometry (ICP-OES), ultraviolet–visible (UV-Vis) spectroscopy, Fourier-transform infrared (FTIR) spectroscopy, and X-ray diffraction (XRD). FEG-SEM revealed spherical to ellipsoidal particle mean diameters of 493 ± 118 nm (CuNPs) and 400 ± 139 (CuZnNPs). The UV-Vis spectra showed no well-defined surface plasmon resonance band. The Cu:Zn ratio in the CuZnNPs (≈1.2:1 by EDS; ≈1.1:1 by EDXRF and ICP-OES) was consistent with the precursor ratio. ICP-OES indicated total metal contents below 1 wt% (9933 mg kg−1 Cu in CuNPs; 4411 mg kg−1 Cu and 4018.5 mg kg−1 Zn in CuZnNPs), values substantially lower than those obtained by EDS and EDXRF. These two techniques also detected high sulfur contents, with S/(Cu + Zn) molar ratios close to 1. FTIR bands at 1060–1100, 1020, and 660 cm−1, which were absent from the decoction spectrum, were consistent with residual sulfate from the precursors. Overall, these results describe the composition and morphology of the materials obtained, but phase identification, colloidal behavior, and agricultural performance remain unconfirmed and require further investigation.

Authors

Institutions

Publication Details

Journal
Nanomaterials
Published
2026-11-19
DOI
https://doi.org/10.3390/nano16221500
Primary Topic
Nanoparticles: synthesis and applications
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Green Synthesis and Characterization of Copper and Copper/Zinc Nanoparticles Using Moringa oleifera Lam. Extract

Adriano do Nascimento Simões, Rafael Leandro Fernandes Melo, Valécia Nogueira Santos e Silva, Bruno Caio Chaves Fernandes et al.
Nanomaterials
Nanoparticles: synthesis and applications
article

Green Synthesis and Characterization of Copper and Copper/Zinc Nanoparticles Using Moringa oleifera Lam. Extract

Adriano do Nascimento Simões, Rafael Leandro Fernandes Melo, Valécia Nogueira Santos e Silva, Bruno Caio Chaves Fernandes, Anderson Rodrigo Luciano da Silva, Rafael Oliveira Batista, Jéssica Christie de Castro Granjeiro, Fred Augusto Lourêdo de Brito, João Everthon da Silva Ribeiro, David Gleyson Ramos, Alex Lázaro de Sousa Nogueira, Luiz Augusto Galdino Melo, Sarah Alencar de Sá
article en

Abstract

The green synthesis of metallic nanoparticles using plant extracts has been investigated as an alternative to conventional chemical routes. In this study, copper-containing nanoparticles (CuNPs) and copper- and zinc-containing nanoparticles (CuZnNPs) were synthesized by adding an aqueous leaf decoction of Moringa oleifera Lam. to precursor solutions of CuSO4 (CuNPs) or CuSO4 and ZnSO4 (CuZnNPs). The materials were characterized by field-emission gun scanning electron microscopy (FEG-SEM), energy-dispersive X-ray spectroscopy (EDS), energy-dispersive X-ray fluorescence (EDXRF), inductively coupled plasma optical emission spectrometry (ICP-OES), ultraviolet–visible (UV-Vis) spectroscopy, Fourier-transform infrared (FTIR) spectroscopy, and X-ray diffraction (XRD). FEG-SEM revealed spherical to ellipsoidal particle mean diameters of 493 ± 118 nm (CuNPs) and 400 ± 139 (CuZnNPs). The UV-Vis spectra showed no well-defined surface plasmon resonance band. The Cu:Zn ratio in the CuZnNPs (≈1.2:1 by EDS; ≈1.1:1 by EDXRF and ICP-OES) was consistent with the precursor ratio. ICP-OES indicated total metal contents below 1 wt% (9933 mg kg−1 Cu in CuNPs; 4411 mg kg−1 Cu and 4018.5 mg kg−1 Zn in CuZnNPs), values substantially lower than those obtained by EDS and EDXRF. These two techniques also detected high sulfur contents, with S/(Cu + Zn) molar ratios close to 1. FTIR bands at 1060–1100, 1020, and 660 cm−1, which were absent from the decoction spectrum, were consistent with residual sulfate from the precursors. Overall, these results describe the composition and morphology of the materials obtained, but phase identification, colloidal behavior, and agricultural performance remain unconfirmed and require further investigation.

NanomaterialsVol. 16(22)
Universidade Federal do Recôncavo da Bahia (BR), Universidade Federal Rural de Pernambuco (BR), Universidade Federal Rural do Semi-Árido (BR)
Nanoparticles: synthesis and applications
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon