A Radial-Axial Thermal Impedance Spectroscopy Methodology Applied to New and Previously Used Cylindrical Lithium-Ion Batteries

Thermal impedance spectroscopy (TIS) provides a non-destructive method for estimating the thermal behavior of lithium-ion batteries, but previous studies of cylindrical cells have primarily considered radial heat transfer. This work introduces a Combined Radial-Axial Model (CRAM) for jointly fitting effective radial, top, and bottom thermal conductivities, specific heat capacity, and boundary heat transfer coefficients. Measurements were performed on new and previously used cylindrical cells using modulated alternating-current excitation and temperature measurements at the lateral surface and both terminals. The measured complex thermal impedances were fitted in the frequency domain using nonlinear least-squares optimization. The investigated groups exhibited comparatively similar radial spectra but distinct differences in their axial thermal-impedance responses. The nominal effective axial parameters differed between the groups, but their local confidence intervals were broad and overlapping. Sensitivity analyses showed that the absolute parameter estimates depend on the assumed power-loss distribution, while the observed axial group trends were preserved across the investigated alternatives and after excluding the highest-frequency data. Practical-identifiability analysis revealed strong correlations between thermal conductivities and heat transfer coefficients, preventing their independent interpretation as intrinsic properties. Because the sample size was limited and the state of health of the previously used cells was not independently quantified, the observed differences cannot be attributed to a specific aging mechanism. The results demonstrate the potential of multi-directional TIS for characterizing combined axial thermal responses in cylindrical cells.

Authors

Institutions

Publication Details

Journal
Batteries
Published
2026-11-19
DOI
https://doi.org/10.3390/batteries12110500
Primary Topic
Battery Modeling and Management
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

A Radial-Axial Thermal Impedance Spectroscopy Methodology Applied to New and Previously Used Cylindrical Lithium-Ion Batteries

A. Scheiber, Robert Kießling, Bernhard Fischbacher, Alexander Kospach
Batteries
Battery Modeling and Management
article

A Radial-Axial Thermal Impedance Spectroscopy Methodology Applied to New and Previously Used Cylindrical Lithium-Ion Batteries

A. Scheiber, Robert Kießling, Bernhard Fischbacher, Alexander Kospach
article en

Abstract

Thermal impedance spectroscopy (TIS) provides a non-destructive method for estimating the thermal behavior of lithium-ion batteries, but previous studies of cylindrical cells have primarily considered radial heat transfer. This work introduces a Combined Radial-Axial Model (CRAM) for jointly fitting effective radial, top, and bottom thermal conductivities, specific heat capacity, and boundary heat transfer coefficients. Measurements were performed on new and previously used cylindrical cells using modulated alternating-current excitation and temperature measurements at the lateral surface and both terminals. The measured complex thermal impedances were fitted in the frequency domain using nonlinear least-squares optimization. The investigated groups exhibited comparatively similar radial spectra but distinct differences in their axial thermal-impedance responses. The nominal effective axial parameters differed between the groups, but their local confidence intervals were broad and overlapping. Sensitivity analyses showed that the absolute parameter estimates depend on the assumed power-loss distribution, while the observed axial group trends were preserved across the investigated alternatives and after excluding the highest-frequency data. Practical-identifiability analysis revealed strong correlations between thermal conductivities and heat transfer coefficients, preventing their independent interpretation as intrinsic properties. Because the sample size was limited and the state of health of the previously used cells was not independently quantified, the observed differences cannot be attributed to a specific aging mechanism. The results demonstrate the potential of multi-directional TIS for characterizing combined axial thermal responses in cylindrical cells.

BatteriesVol. 12(11)
Virtual Vehicle Research GmbH (Austria) (AT)
Battery Modeling and Management
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon