Localized crack filling versus full impregnation for cracked flattened moso bamboo lamellae: Flexural performance and crack-zone morphology

Cracks formed during industrial bamboo flattening reduce the mechanical reliability and marketable yield of otherwise usable lamellae. This study examined whether the spatial mode of epoxy application influences post-treatment flexural performance more strongly than the resin-to-curing-agent formulation. Cracked outer-layer lamellae of moso bamboo ( Phyllostachys edulis (Carrière) J.Houz.) were repaired by localized crack filling or full impregnation at resin-to-curing-agent mass ratios of 1:1, 2:1, and 3:1. Localized crack filling produced higher mean flexural strength and modulus than full impregnation at all three ratios. Two-way ANOVA showed significant associations of both factors with the flexural responses, with larger effect sizes for application strategy than formulation ratio for flexural strength (partial η² = 0.298 vs 0.208) and flexural modulus (partial η² = 0.441 vs 0.212). The 3:1 localized crack-filling treatment exhibited the highest mean flexural strength (286.36 MPa) and a flexural modulus of 25.33 GPa. SEM revealed qualitative differences in crack-zone morphology: localized filling was generally associated with epoxy concentrated within the crack and readily distinguishable adjacent fiber-bearing tissue, whereas full impregnation was associated with broader resin-affected regions and local heterogeneity or interfacial discontinuities. Localized crack filling also showed lower initial color differences than full impregnation, although short-term color changes varied with formulation, measurement region, and exposure time. Overall, localized crack filling, particularly at 3:1 under the tested conditions, provided the most balanced combination of flexural performance, crack-zone morphology, and initial visual compatibility, suggesting a practical route for retaining cracked outer-layer lamellae in visible furniture and interior decorative components. Because pretreatment crack dimensions and severity were not quantitatively recorded, these treatment differences should be interpreted within the sampled naturally cracked lamellae and verified further using specimens classified by initial crack characteristics.

Authors

Institutions

Publication Details

Journal
Industrial Crops and Products
Published
2026-11-19
DOI
https://doi.org/10.1016/j.indcrop.2026.124808
Primary Topic
Bamboo properties and applications
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Localized crack filling versus full impregnation for cracked flattened moso bamboo lamellae: Flexural performance and crack-zone morphology

Yingyue Yu, P. Chen, Shuangshuang Wu, Wei Xu et al.
Industrial Crops and Products
Bamboo properties and applications
article

Localized crack filling versus full impregnation for cracked flattened moso bamboo lamellae: Flexural performance and crack-zone morphology

Yingyue Yu, P. Chen, Shuangshuang Wu, Wei Xu, Hong Chen
article en

Abstract

Cracks formed during industrial bamboo flattening reduce the mechanical reliability and marketable yield of otherwise usable lamellae. This study examined whether the spatial mode of epoxy application influences post-treatment flexural performance more strongly than the resin-to-curing-agent formulation. Cracked outer-layer lamellae of moso bamboo ( Phyllostachys edulis (Carrière) J.Houz.) were repaired by localized crack filling or full impregnation at resin-to-curing-agent mass ratios of 1:1, 2:1, and 3:1. Localized crack filling produced higher mean flexural strength and modulus than full impregnation at all three ratios. Two-way ANOVA showed significant associations of both factors with the flexural responses, with larger effect sizes for application strategy than formulation ratio for flexural strength (partial η² = 0.298 vs 0.208) and flexural modulus (partial η² = 0.441 vs 0.212). The 3:1 localized crack-filling treatment exhibited the highest mean flexural strength (286.36 MPa) and a flexural modulus of 25.33 GPa. SEM revealed qualitative differences in crack-zone morphology: localized filling was generally associated with epoxy concentrated within the crack and readily distinguishable adjacent fiber-bearing tissue, whereas full impregnation was associated with broader resin-affected regions and local heterogeneity or interfacial discontinuities. Localized crack filling also showed lower initial color differences than full impregnation, although short-term color changes varied with formulation, measurement region, and exposure time. Overall, localized crack filling, particularly at 3:1 under the tested conditions, provided the most balanced combination of flexural performance, crack-zone morphology, and initial visual compatibility, suggesting a practical route for retaining cracked outer-layer lamellae in visible furniture and interior decorative components. Because pretreatment crack dimensions and severity were not quantitatively recorded, these treatment differences should be interpreted within the sampled naturally cracked lamellae and verified further using specimens classified by initial crack characteristics.

Industrial Crops and ProductsVol. 254
Nanjing Forestry University (CN)
Bamboo properties and applications
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon