Sustainable low-carbon concrete evaluation through electrochemical impedance spectroscopy and data-driven modeling

The research paper examines the performance of a low-clinker blended binder system including calcite, bentonite and ground granulated blast furnace slag (GGBS) in M30 grade concrete. The main aim of the research is to explore the effect of a combination of calcite, bentonite, and ground granulated blast furnace slag (GGBS) on the strength and durability properties of M 30 grade of concrete. The cement content was set at 50% with all mixes. A combination of calcite and bentonite, in equal proportions, was used to replace cement at levels of 0%, 5%, 10%, and 15%. The GGBS content was varied to 50%, 45%, 40% and 35% keeping a constant water to cement ratio of 0.45. This study will include an investigation into the fresh concrete properties such as slump and compaction factor, the chemical and mechanical properties, with and without CO 2 sequestration. Moreover, microstructural properties have been taken as a subject of X-Ray Diffraction (XRD). The electrochemical impedance spectroscopy (EIS) and the measurement of alternating current (AC) conductivity is further used to analyze the pore structure of the concrete. Autoregressive and tabular prior data fitting machine learning models were used to predict compressive, split tensile, and flexural strength using only experimental mechanical strength dataset. The models were highly accurate in the testing data with the highest results observed on compressive strength with the use of autoregressive model (R² = 0.9688), split tensile strength with the use of tabular fitting (R 2 = 0.9748) and flexural strength with the use of the autoregressive model (R 2 = 0.9657). These findings prove the possibility of the data-driven method to optimize concrete mix design and improve the sustainability performance. The designed blended binder system is believed to lower the embodied CO 2 emission by about 35–40% relative to traditional M 30 concrete, which is consistent with decarbonization of the world and a sustainable infrastructure objective.

Authors

Institutions

Publication Details

Journal
Scientific Reports
Published
2026-11-19
DOI
https://doi.org/10.1038/s41598-026-80906-2
Primary Topic
Concrete and Cement Materials Research
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Sustainable low-carbon concrete evaluation through electrochemical impedance spectroscopy and data-driven modeling

Kandagal Nagaraja, Abraham Mengistu Gashe, Akkala Prasanna Divya Sai, Siva Shanmukha Anjaneya Babu Padavala et al.
Scientific Reports
Concrete and Cement Materials Research
article

Sustainable low-carbon concrete evaluation through electrochemical impedance spectroscopy and data-driven modeling

Kandagal Nagaraja, Abraham Mengistu Gashe, Akkala Prasanna Divya Sai, Siva Shanmukha Anjaneya Babu Padavala, B. Narendra Kumar
article en

Abstract

The research paper examines the performance of a low-clinker blended binder system including calcite, bentonite and ground granulated blast furnace slag (GGBS) in M30 grade concrete. The main aim of the research is to explore the effect of a combination of calcite, bentonite, and ground granulated blast furnace slag (GGBS) on the strength and durability properties of M 30 grade of concrete. The cement content was set at 50% with all mixes. A combination of calcite and bentonite, in equal proportions, was used to replace cement at levels of 0%, 5%, 10%, and 15%. The GGBS content was varied to 50%, 45%, 40% and 35% keeping a constant water to cement ratio of 0.45. This study will include an investigation into the fresh concrete properties such as slump and compaction factor, the chemical and mechanical properties, with and without CO 2 sequestration. Moreover, microstructural properties have been taken as a subject of X-Ray Diffraction (XRD). The electrochemical impedance spectroscopy (EIS) and the measurement of alternating current (AC) conductivity is further used to analyze the pore structure of the concrete. Autoregressive and tabular prior data fitting machine learning models were used to predict compressive, split tensile, and flexural strength using only experimental mechanical strength dataset. The models were highly accurate in the testing data with the highest results observed on compressive strength with the use of autoregressive model (R² = 0.9688), split tensile strength with the use of tabular fitting (R 2 = 0.9748) and flexural strength with the use of the autoregressive model (R 2 = 0.9657). These findings prove the possibility of the data-driven method to optimize concrete mix design and improve the sustainability performance. The designed blended binder system is believed to lower the embodied CO 2 emission by about 35–40% relative to traditional M 30 concrete, which is consistent with decarbonization of the world and a sustainable infrastructure objective.

Scientific Reports
Vallurupalli Nageswara Rao Vignana Jyothi Institute of Engineering and Technology (IN), Addis Ababa University (ET)
Concrete and Cement Materials Research
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon