Experimental and ANN-based optimization of FDM-printed biothermoplastic for wind turbine blade applications
The mechanical behavior and structural integrity of 3D printed components are strongly affected by the choice of manufacturing parameters. An integrated experimental-numerical framework is developed to investigate and enhance the mechanical performance of polylactic acid (PLA) fabricated by fused deposition modeling (FDM) for renewable energy applications. The study first experimentally evaluates the effects of different manufacturing conditions on the mechanical behavior of printed PLA. Scanning electron microscopy (SEM) is subsequently employed to examine the fracture surfaces and provide insight into interlayer adhesion and porosity governing the mechanical response. Based on the experimental results, an artificial neural network (ANN) is developed to capture the nonlinear relationships between FDM parameters and mechanical properties. The ANN is then coupled with a desirability function methodology to perform multi-objective optimization and identify the FDM conditions providing the most favorable overall mechanical performance. The optimal conditions were identified as a printing orientation of 0°/90°, printing speed of 45 mm/s, infill density of 100%, and layer thickness of 0.3 mm, yielding experimentally measured values of 4180 MPa for Young’s modulus, 60.6 MPa for ultimate tensile strength, 40.2 MPa for yield strength, and 6.8% for strain at failure. The main contribution of the proposed framework is the systematic transfer of these optimized material properties from the manufacturing scale to the application scale. Accordingly, they are incorporated into finite element and computational fluid dynamics analyses of NACA and Savonius wind-turbine blades to evaluate stress, strain, and turbulent kinetic energy under operating conditions. The results demonstrate the applicability of this integrated process to application framework for developing mechanically reliable FDM-printed components for sustainable wind energy applications.
Authors
- Abdessalem Jarraya (ORCID: https://orcid.org/0000-0002-8619-0305)
- Amir Kessentini (ORCID: https://orcid.org/0000-0002-6929-9069)
- Mohanad Bahshwan (ORCID: https://orcid.org/0000-0002-2869-9162)
- Ali Mkaddem (ORCID: https://orcid.org/0000-0002-3825-778X)
- Sarhan Karray
- Sami Mansour Ghazali (ORCID: https://orcid.org/0000-0002-1355-899X)
- Hamdi Hentati (ORCID: https://orcid.org/0000-0002-7795-916X)
Institutions
- University of Sfax (TN)
- University of Carthage (TN)
- University of Jeddah (SA)
- University of Sousse (TN)
Publication Details
- Journal
- Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science
- Published
- 2026-11-19
- DOI
- https://doi.org/10.1177/09544062261504356
- Primary Topic
- Additive Manufacturing and 3D Printing Technologies
- Type
- article
- Field-Weighted Citation Impact
- 0.00