Oil–Air Two-Phase Flow and Heat Transfer in an Under-Race-Lubricated Double-Row Tapered Roller Bearing
Oil retention and heat removal in an under-race-lubricated double-row tapered roller bearing were investigated using oil–air volume-of-fluid (VOF) calculations. Transient tilting flows and steady conjugate heat transfer were analyzed separately. The thermal model applies prescribed equivalent surface heat fluxes from semi-empirical friction torque, with constant oil viscosity and no local elastohydrodynamic shear heating or thermal–viscosity feedback. The late-time cavity oil fraction fell from 0.1360 to 0.0425 as bearing speed increased from 1000 to 4000 r/min. At 2000 r/min and 0.10 s, it rose from 0.0774 to 0.1516 as the jet speed increased from 10 to 30 m/s. Port count and total flow varied together in the one- and eight-port runs. Higher jet speed lowered maximum solid temperature within each steady diameter group. At d = 1.2 mm and v = 10 m/s, the solid peak rose across the 2000, 3000 and 4000 r/min cases under fixed heat input. The archived peak fell to 311.53 K at 5000 r/min.
Authors
- Yu Dai (ORCID: https://orcid.org/0000-0002-1991-000X)
- Renjie Li (ORCID: https://orcid.org/0000-0002-8418-4630)
Institutions
- Central South University (CN)
Publication Details
- Journal
- Lubricants
- Published
- 2026-11-19
- DOI
- https://doi.org/10.3390/lubricants14110444
- Primary Topic
- Tribology and Lubrication Engineering
- Type
- article
- Field-Weighted Citation Impact
- 0.00