Decarbonisation: carbon dioxide capture from cement plant flue gas
Cement manufacturing industry is responsible for 7–8% of global anthropogenic CO₂ emissions, and unlike the power sector, the dominant emission pathway – calcination of limestone – is inherent to the product chemistry and cannot be addressed through fuel switching. This manuscript presents a techno-economic evaluation of post-combustion CO₂ capture from cement kiln flue gas, comparing four amine-absorption process configurations across three regulatory-grade capture targets (85%, 90%, 95%). A steady-state Aspen Hysys process model was developed & validated against published industrial data from a cement plant. Parametric stress tests at 90% and 95% capture targets revealed non-linear thermodynamic penalties: the unintegrated base case enhanced energy consumption from 3.71 to 4.48 GJ/tCO₂, due to 25% increase in liquid-to-gas ratio. Two operational constraints emerged at 95% capture – reboiler temperatures approaching the MEA degradation threshold temperature (122°C) and absorber tray hydraulics reaching 82% of flooding velocity. Techno-economic analysis across twelve configuration-target combinations (four configurations x three capture targets) shows that Lean Vapor Compression (LVC) configuration achieves lowest Levelized Cost of Carbon Capture (LCCC) at $29.84/tCO₂ at 85% capture. The combined SSF + LVC topology, while thermodynamically superior, is insufficient to recover its additional hardware cost – therefore not recommended for industrial deployment.
Authors
- Anil K. Saroha (ORCID: https://orcid.org/0000-0001-8252-346X)
- Ashwani Malhotra
- Amit Kharadi
Institutions
- Indian Institute of Technology Delhi (IN)
Publication Details
- Journal
- Indian Chemical Engineer
- Published
- 2026-11-18
- DOI
- https://doi.org/10.1080/00194506.2026.2758648
- Primary Topic
- Carbon Dioxide Capture Technologies
- Type
- article
- Field-Weighted Citation Impact
- 0.00