Nanofluids for Compact Heat Exchangers

Nanofluids, colloidal suspensions of particles smaller than 100 nm in a base liquid, are widely studied as advanced coolants because even small particle loadings can raise thermal conductivity above that of the base fluid. The benefit, however, is partly offset by higher viscosity and density, so a fair assessment must couple thermophysical properties with flow-side penalties. This paper presents a model-based comparison of four water-based nanofluids (Al₂O₃, CuO, TiO₂, ZnO) at volume fractions of 0 to 4% in turbulent pipe flow. Conductivity is evaluated with the Maxwell model, viscosity with the Brinkman model, and density and specific heat with mixture rules. Heat-transfer coefficients follow the Dittus–Boelter correlation at a fixed Reynolds number of 10,000, and pumping power follows the Blasius friction factor. Conductivity increases monotonically with loading, and Al₂O₃ gives the highest effective conductivity ratio, but the highest heat-transfer coefficient gain at 4% is only 6.1% (Al₂O₃) because the Prandtl number falls as viscosity rises. When pumping power is included through a figure of merit, CuO at 4% performs best (1.114) and Al₂O₃ falls below unity (0.978). The study shows that conductivity ranking alone is a poor guide to coolant selection.

Authors

Publication Details

Journal
Zenodo (CERN European Organization for Nuclear Research)
Published
2026-11-19
DOI
https://doi.org/10.5281/zenodo.24368649
Primary Topic
Nanofluid Flow and Heat Transfer
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Nanofluids for Compact Heat Exchangers

Pranesh B. Bamankar
Zenodo (CERN European Organization for Nuclear Research)
Nanofluid Flow and Heat Transfer
article

Nanofluids for Compact Heat Exchangers

Pranesh B. Bamankar
article en

Abstract

Nanofluids, colloidal suspensions of particles smaller than 100 nm in a base liquid, are widely studied as advanced coolants because even small particle loadings can raise thermal conductivity above that of the base fluid. The benefit, however, is partly offset by higher viscosity and density, so a fair assessment must couple thermophysical properties with flow-side penalties. This paper presents a model-based comparison of four water-based nanofluids (Al₂O₃, CuO, TiO₂, ZnO) at volume fractions of 0 to 4% in turbulent pipe flow. Conductivity is evaluated with the Maxwell model, viscosity with the Brinkman model, and density and specific heat with mixture rules. Heat-transfer coefficients follow the Dittus–Boelter correlation at a fixed Reynolds number of 10,000, and pumping power follows the Blasius friction factor. Conductivity increases monotonically with loading, and Al₂O₃ gives the highest effective conductivity ratio, but the highest heat-transfer coefficient gain at 4% is only 6.1% (Al₂O₃) because the Prandtl number falls as viscosity rises. When pumping power is included through a figure of merit, CuO at 4% performs best (1.114) and Al₂O₃ falls below unity (0.978). The study shows that conductivity ranking alone is a poor guide to coolant selection.

Zenodo (CERN European Organization for Nuclear Research)
Nanofluid Flow and Heat Transfer
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon