Sustainable Removal of Heavy Metals Using Alginate‐Encapsulated Recycled Concrete: Evaluation of Efficiency and Life‐Cycle Implications
Valorizing construction and demolition waste within a circular economy framework offers a promising strategy for sustainable wastewater treatment. This study investigates fine recycled concrete waste (RCW, < 80 μm), a byproduct of mechanical testing, as an adsorbent for removing Pb 2+ and Zn 2+ . To address hydraulic clogging and fine‐particle washout, RCW was encapsulated in a biopolymeric sodium alginate matrix, yielding an organo‐mineral hybrid composite. SEM–EDX analysis confirmed successful incorporation of concrete aggregates into the hydrogel network, introducing reactive carboxylate (–COO–) and hydroxyl (–OH) groups that interact synergistically with the mineral, calcium‐rich core. Batch experiments showed rapid adsorption kinetics and maximum capacities ( q max ) of 16.10 mg·g −1 for Pb 2+ (Langmuir model) and 6.32 mg·g −1 for Zn 2+ (Freundlich model), driven primarily by ion exchange with Ca 2+ ‐rich phases and surface precipitation. In fixed‐bed column experiments, the composite beads achieved simultaneous removal efficiencies above 90% for both metal ions. A comprehensive life cycle assessment (LCA) quantitatively evaluated system sustainability. Mechanical processing of raw RCW (crushing and grinding) contributed less than 5% to total environmental impacts. The Climate Change impact category was dominated by the operational adsorption phase (58.9%) due to energy consumption and by the encapsulation step (41.1%), primarily driven by sodium alginate production and drying. In terms of endpoint damages, encapsulation and adsorption accounted for over 95% of total ecosystem and human health impacts, indicating a significant trade‐off between operational stability and material sustainability. These results highlight a key eco‐design challenge: although encapsulated RCW is an effective adsorbent, its industrial viability depends on optimizing the matrix formulation. Future research should prioritize integrating waste‐derived biopolymers to balance operational stability and environmental benefits.
Authors
- Leïla Adnane
- Radia Maachou (ORCID: https://orcid.org/0000-0002-1350-8781)
- Abdeltif Amrane (ORCID: https://orcid.org/0000-0003-2622-2384)
- Karim Kriaa (ORCID: https://orcid.org/0000-0001-6756-604X)
- Noureddine Ali Elboughdiri (ORCID: https://orcid.org/0000-0003-2923-3062)
- Djamel Ghernaout (ORCID: https://orcid.org/0000-0002-0806-3810)
- Abdelouahab Lefkir (ORCID: https://orcid.org/0000-0002-8002-0129)
- HIBA FERHAT
- Racha Mouzai
- Loubna Dehdouh
Institutions
- Centre National de la Recherche Scientifique (FR)
- University of Sciences and Technology Houari Boumediene (DZ)
- Imam Mohammad ibn Saud Islamic University (SA)
- University of Ha'il (SA)
- Institut des Sciences Chimiques de Rennes (FR)
- National School of Built and Ground Works Engineering (DZ)
- Université de Rennes (FR)
- University of Blida (DZ)
Publication Details
- Journal
- Asia-Pacific Journal of Chemical Engineering
- Published
- 2026-11-18
- DOI
- https://doi.org/10.1002/apj.70295
- Primary Topic
- Adsorption and biosorption for pollutant removal
- Type
- article
- Field-Weighted Citation Impact
- 0.00