Comparative study of damage on tungsten materials irradiated by ELM-like plasma with different energy densities expected in ITER operations

During the operation of the tokamak device, the high heat load released by the core plasma instability events severely affects the structure and performance of tungstenbased divertor materials. For the expected Type I ELMs in future long-pulse steadystate fusion devices, the coaxial gun discharge plasma parameters are designed to simulate the characteristics of low-medium energy density. Under constant initial conditions (discharge frequency, gas-prefilled), the total accumulated heat flux is kept constant by varying the energy density and the number of pulses. By combining the plasma-material interaction process, the temperature evolution of tungsten (W) target under different heat loads and its damage effects are comparatively studied. The results show that when the total energy is fixed, the thermal deposition time scale and the instantaneous temperature gradient lead to different types of damage, including roughening, grain loss, blistering, crack networks, and cracking accompanied by melting. Low-energy-density multi-pulse impacts cause slow heat deposition and small temperature gradients, increasing surface roughness via cyclic thermal stress. Highenergy-density impacts involving only a few pulses cause rapid heat deposition and steep temperature gradients, inducing high thermal stresses that lead to blistering and cracking. The energy density of an individual pulse determines the transition from surface to bulk damage. These results suggest that peak heat load control should take priority over cumulative heat flux limitation in the service design of W targets for fusion devices.

Authors

Institutions

Publication Details

Journal
Plasma Physics and Controlled Fusion
Published
2026-11-19
DOI
https://doi.org/10.1088/1361-6587/aec47c
Primary Topic
Fusion materials and technologies
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Comparative study of damage on tungsten materials irradiated by ELM-like plasma with different energy densities expected in ITER operations

Meng Du, Youzhen Wang, Liangwen Qi, Shuai Liu et al.
Plasma Physics and Controlled Fusion
Fusion materials and technologies
article

Comparative study of damage on tungsten materials irradiated by ELM-like plasma with different energy densities expected in ITER operations

Meng Du, Youzhen Wang, Liangwen Qi, Shuai Liu, Xiaodong Wen, Jianyou Liu, Chuangjia Tuo
article en

Abstract

During the operation of the tokamak device, the high heat load released by the core plasma instability events severely affects the structure and performance of tungstenbased divertor materials. For the expected Type I ELMs in future long-pulse steadystate fusion devices, the coaxial gun discharge plasma parameters are designed to simulate the characteristics of low-medium energy density. Under constant initial conditions (discharge frequency, gas-prefilled), the total accumulated heat flux is kept constant by varying the energy density and the number of pulses. By combining the plasma-material interaction process, the temperature evolution of tungsten (W) target under different heat loads and its damage effects are comparatively studied. The results show that when the total energy is fixed, the thermal deposition time scale and the instantaneous temperature gradient lead to different types of damage, including roughening, grain loss, blistering, crack networks, and cracking accompanied by melting. Low-energy-density multi-pulse impacts cause slow heat deposition and small temperature gradients, increasing surface roughness via cyclic thermal stress. Highenergy-density impacts involving only a few pulses cause rapid heat deposition and steep temperature gradients, inducing high thermal stresses that lead to blistering and cracking. The energy density of an individual pulse determines the transition from surface to bulk damage. These results suggest that peak heat load control should take priority over cumulative heat flux limitation in the service design of W targets for fusion devices.

Plasma Physics and Controlled Fusion
Lanzhou Jiaotong University (CN), Guilin University of Electronic Technology (CN), Xi'an Jiaotong University (CN)
Fusion materials and technologies
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon