From percolation and in situ resistance measurements to tunable plasmonics: Reproducible self-assembly by thermal evaporation of small, close-packed gold nanoparticles

Gold nanostructures exhibit optical properties that are highly sensitive to their morphology, making precise control over nanoparticle growth a key challenge for plasmonic response. In this work, we report, for the first time, a simple and highly reproducible strategy to control the morphology and plasmonic response of thermally evaporated gold nanoparticles (Au-NPs) on glass substrates by in situ electrical resistance monitoring. This approach enables precise control over nanoparticle growth through successive deposition cycles, providing an effective alternative to conventional mass-based deposition monitoring. The Au-NPs were fabricated by the thermal evaporation of bulk gold onto glass substrates. An initial gold layer with a well-defined electrical resistance (R0) was deposited first, establishing a reproducible percolation state that served as the reference for subsequent deposition cycles. Subsequently, a series of consecutive gold deposits were made while maintaining a constant resistance decrement (ΔR = Rn–R0 = 10 Ω, Rn ≪ R0) for each deposition step. The influence of sequential deposition on nanoparticle formation and localized surface plasmon resonance (LSPR) was investigated for structures produced after 3, 6, 9, and 12 deposition cycles; the four samples displayed an initial resistance of (1.2015 ± 0.10) kΩ. Morphological characterization through transmission electron microscopy revealed that the controlled reduction in electrical resistance drives Au-NP growth, impacting their size, separation distance, filling fraction, and the consequent LSPR. The optical measurements showed systematic and tunable LSPR behavior, with resonance characteristics strongly correlated to the resistance-controlled growth process. Using identical ΔR values for each deposition cycle resulted in highly reproducible nanoparticle populations and plasmonic responses across independent fabrication runs.

Authors

Institutions

Publication Details

Journal
Journal of Vacuum Science & Technology A Vacuum Surfaces and Films
Published
2026-11-19
DOI
https://doi.org/10.1116/6.0005841
Primary Topic
Gold and Silver Nanoparticles Synthesis and Applications
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

From percolation and in situ resistance measurements to tunable plasmonics: Reproducible self-assembly by thermal evaporation of small, close-packed gold nanoparticles

J. A. Reyes‐Esqueda, Enrique Vigueras‐Santiago, Susana Hernández López, Delfino Reyes et al.
Journal of Vacuum Science & Technology A Vacuum Surfaces and Films
Gold and Silver Nanoparticles Synthesis and Applications
article

From percolation and in situ resistance measurements to tunable plasmonics: Reproducible self-assembly by thermal evaporation of small, close-packed gold nanoparticles

J. A. Reyes‐Esqueda, Enrique Vigueras‐Santiago, Susana Hernández López, Delfino Reyes, Lilia García Rosales, Andrea Zamora Valdéz
article en

Abstract

Gold nanostructures exhibit optical properties that are highly sensitive to their morphology, making precise control over nanoparticle growth a key challenge for plasmonic response. In this work, we report, for the first time, a simple and highly reproducible strategy to control the morphology and plasmonic response of thermally evaporated gold nanoparticles (Au-NPs) on glass substrates by in situ electrical resistance monitoring. This approach enables precise control over nanoparticle growth through successive deposition cycles, providing an effective alternative to conventional mass-based deposition monitoring. The Au-NPs were fabricated by the thermal evaporation of bulk gold onto glass substrates. An initial gold layer with a well-defined electrical resistance (R0) was deposited first, establishing a reproducible percolation state that served as the reference for subsequent deposition cycles. Subsequently, a series of consecutive gold deposits were made while maintaining a constant resistance decrement (ΔR = Rn–R0 = 10 Ω, Rn ≪ R0) for each deposition step. The influence of sequential deposition on nanoparticle formation and localized surface plasmon resonance (LSPR) was investigated for structures produced after 3, 6, 9, and 12 deposition cycles; the four samples displayed an initial resistance of (1.2015 ± 0.10) kΩ. Morphological characterization through transmission electron microscopy revealed that the controlled reduction in electrical resistance drives Au-NP growth, impacting their size, separation distance, filling fraction, and the consequent LSPR. The optical measurements showed systematic and tunable LSPR behavior, with resonance characteristics strongly correlated to the resistance-controlled growth process. Using identical ΔR values for each deposition cycle resulted in highly reproducible nanoparticle populations and plasmonic responses across independent fabrication runs.

Journal of Vacuum Science & Technology A Vacuum Surfaces and FilmsVol. 45(1)
Universidad Autónoma del Estado de México (MX), Universidad Nacional Autónoma de México (MX)
Gold and Silver Nanoparticles Synthesis and Applications
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon