X-Ray studies of samples synthesized by direct laser deposition from electroerosion iron-chromium-nickel powders

Purpose . X-ray diffraction and X-ray spectral analyses of samples obtained by direct laser growth from ironchromium-nickel powders. The latter were produced by electrodispersing metallic waste products of heat-resistant alloy 20X25H20X2 in various media. Methods. The starting materials for the experiments were industrial waste from the 20Kh25N20S2 alloy, which were processed into powders using a specialized electrodispersion unit. Distilled water (GOST R 58144-2018) and isopropyl alcohol (GOST 9805-84) were used as working media. The experimental samples were grown using the “ILIST-M” robotic complex with direct laser deposition technology. The chemical composition of the additive samples was studied using an EDAX energy-dispersive spectrometer integrated into a QUANTA 200 3D scanning electron microscope, and the phase composition was determined using a Rigaku Ultima IV diffractometer. Results . The experiment showed that when an oxygen-containing medium (water) is used as the working fluid, the presence of oxygen is detected in the structure of the grown samples, whereas the use of a carbon‑containing medium (alcohol) leads to the appearance of carbon. The remaining elements are distributed evenly throughout the volume of the products. It has been established that the basic phases in the samples obtained from powders after dispersion in distilled water are pure metals (Ni, Cr, Fe). In the samples synthesized from powders in an alcohol medium, in addition to pure metals (Ni, Cr, Fe), carbide phases (Ni3C and Fe3C) were detected. Conclusion . The obtained results prove that the chemical and phase compositions are key factors determining the mechanical properties of additive products and the prospects for their practical application.

Authors

Publication Details

Journal
Proceedings of the Southwest State University Series Engineering and Technologies
Published
2026-11-18
DOI
https://doi.org/10.21869/2223-1528-2026-16-3-39-51
Primary Topic
Additive Manufacturing Materials and Processes
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

X-Ray studies of samples synthesized by direct laser deposition from electroerosion iron-chromium-nickel powders

M. S. Korolev, A.E. Andreeva, M. A. Borodin
Proceedings of the Southwest State University Series Engineering and Technologies
Additive Manufacturing Materials and Processes
article

X-Ray studies of samples synthesized by direct laser deposition from electroerosion iron-chromium-nickel powders

M. S. Korolev, A.E. Andreeva, M. A. Borodin
article en

Abstract

Purpose . X-ray diffraction and X-ray spectral analyses of samples obtained by direct laser growth from ironchromium-nickel powders. The latter were produced by electrodispersing metallic waste products of heat-resistant alloy 20X25H20X2 in various media. Methods. The starting materials for the experiments were industrial waste from the 20Kh25N20S2 alloy, which were processed into powders using a specialized electrodispersion unit. Distilled water (GOST R 58144-2018) and isopropyl alcohol (GOST 9805-84) were used as working media. The experimental samples were grown using the “ILIST-M” robotic complex with direct laser deposition technology. The chemical composition of the additive samples was studied using an EDAX energy-dispersive spectrometer integrated into a QUANTA 200 3D scanning electron microscope, and the phase composition was determined using a Rigaku Ultima IV diffractometer. Results . The experiment showed that when an oxygen-containing medium (water) is used as the working fluid, the presence of oxygen is detected in the structure of the grown samples, whereas the use of a carbon‑containing medium (alcohol) leads to the appearance of carbon. The remaining elements are distributed evenly throughout the volume of the products. It has been established that the basic phases in the samples obtained from powders after dispersion in distilled water are pure metals (Ni, Cr, Fe). In the samples synthesized from powders in an alcohol medium, in addition to pure metals (Ni, Cr, Fe), carbide phases (Ni3C and Fe3C) were detected. Conclusion . The obtained results prove that the chemical and phase compositions are key factors determining the mechanical properties of additive products and the prospects for their practical application.

Proceedings of the Southwest State University Series Engineering and TechnologiesVol. 16(3)
Additive Manufacturing Materials and Processes
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon