Processability and mechanical characterisation of short fique fibre/PLA sustainable composites manufactured via injection moulding

Short natural fibres are widely used as reinforcement in polymer matrices due to their ecological and economic advantages, with properties tailored to specific applications. The use of biodegradable matrices with low-cost natural fibres reduces environmental impact and material costs. However, high fibre content in such composites requires a balance between processability and mechanical performance. In this study, polylactic acid (PLA) composites containing 40.5 vol% randomly oriented fique fibres are fabricated by injection moulding. The influence of 0.3 wt% zinc (Zn), magnesium (Mg), and aluminium (Al) stearates on processability, thermal stability, and mechanical properties are evaluated. The incorporation of metallic stearates improves flowability, with PLA-F-Mg exhibiting the highest MFI (31.96 g/10min), corresponding to a 61.3% increase relative to unmodified composites. However, stearates reduce tensile strength, with PLA-F-Zn exhibiting the lowest value (21.40 MPa). Thermal analysis shows that Zn stearate causes the highest reduction in thermal stability (308.81°C), whereas Mg stearate maintains comparatively higher thermal stability (355.74°C). The addition of fique fibres reduces the impact strength, although Mg-loaded composite provides the highest value among modified composites. SEM analysis reveals fibre pull-out, interfacial debonding, and longer crack formation, particularly in Zn-loaded composites, indicating inefficient stress transfer. Overall, Mg stearate provides the most balanced improvement in processability, thermal stability, and mechanical performance, demonstrating its potential for improving the processability of high fibre content fique/PLA composites.

Authors

Institutions

Publication Details

Journal
Journal of Reinforced Plastics and Composites
Published
2026-11-19
DOI
https://doi.org/10.1177/07316844261510147
Primary Topic
Natural Fiber Reinforced Composites
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Processability and mechanical characterisation of short fique fibre/PLA sustainable composites manufactured via injection moulding

Orestis Vryonis, Ehsan Naderi Kalali, Meisam Jalalvand, Zia Ullah Arif et al.
Journal of Reinforced Plastics and Composites
Natural Fiber Reinforced Composites
article

Processability and mechanical characterisation of short fique fibre/PLA sustainable composites manufactured via injection moulding

Orestis Vryonis, Ehsan Naderi Kalali, Meisam Jalalvand, Zia Ullah Arif, Johnattan Vargas, Saeid Lotfian, Juan Meza, Boomadevi Shanmugam, Liu Yang
article en

Abstract

Short natural fibres are widely used as reinforcement in polymer matrices due to their ecological and economic advantages, with properties tailored to specific applications. The use of biodegradable matrices with low-cost natural fibres reduces environmental impact and material costs. However, high fibre content in such composites requires a balance between processability and mechanical performance. In this study, polylactic acid (PLA) composites containing 40.5 vol% randomly oriented fique fibres are fabricated by injection moulding. The influence of 0.3 wt% zinc (Zn), magnesium (Mg), and aluminium (Al) stearates on processability, thermal stability, and mechanical properties are evaluated. The incorporation of metallic stearates improves flowability, with PLA-F-Mg exhibiting the highest MFI (31.96 g/10min), corresponding to a 61.3% increase relative to unmodified composites. However, stearates reduce tensile strength, with PLA-F-Zn exhibiting the lowest value (21.40 MPa). Thermal analysis shows that Zn stearate causes the highest reduction in thermal stability (308.81°C), whereas Mg stearate maintains comparatively higher thermal stability (355.74°C). The addition of fique fibres reduces the impact strength, although Mg-loaded composite provides the highest value among modified composites. SEM analysis reveals fibre pull-out, interfacial debonding, and longer crack formation, particularly in Zn-loaded composites, indicating inefficient stress transfer. Overall, Mg stearate provides the most balanced improvement in processability, thermal stability, and mechanical performance, demonstrating its potential for improving the processability of high fibre content fique/PLA composites.

Journal of Reinforced Plastics and Composites
University of Strathclyde (GB), Universidad Nacional de Colombia (CO), University of Southampton (GB), Southwest Jiaotong University (CN)
Natural Fiber Reinforced Composites
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon