Discrete element modeling of bivalve Mactra veneriformis: parameter calibration and mechanized harvesting validation

To reduce mudflat disturbance caused by hydraulic dredging and facilitate efficient, environmentally responsible mechanized harvesting of buried bivalves, this study aimed to develop an accurate discrete element method (DEM) model for analyzing Mactra veneriformis (M. veneriformis)–machine interactions and optimizing harvesting parameters. The geometry of M. veneriformis was reconstructed using three-dimensional scanning and represented in EDEM using a multi-sphere model. The Edinburgh elasto-plastic adhesion (EEPA) model was used to describe M. veneriformis–M. veneriformis interactions. Physical experiments were used to determine the static friction and restitution coefficients for M. veneriformis–stainless steel contacts and the restitution coefficient for M. veneriformis–M. veneriformis contacts, while DEM simulations were used to calibrate the remaining contact parameters. The angle of repose (AOR) was measured using the cylinder-lifting method and selected as the macroscopic response for DEM calibration. A Plackett–Burman design followed by a Box–Behnken design was used to screen and optimize the influential contact parameters. The rolling friction coefficient, static friction coefficient, and surface energy of M. veneriformis–M. veneriformis contacts were identified as the principal factors affecting the AOR. The optimized values were 0.05, 0.30, and 2 J m⁻², respectively. Using these parameters, the simulated AOR was 23.17°, with a relative error of 4.09% relative to the physical experiment. The calibrated model was subsequently applied to mechanized harvesting simulations and validated against field harvesting tests, reproducing the principal trends observed under field conditions. The validated DEM model provides a basis for analyzing M. veneriformis–machine interactions and optimizing mechanized harvesting systems, while the proposed modeling and calibration framework may also support DEM studies of other bivalves.

Authors

Institutions

Publication Details

Journal
Journal of Agricultural Engineering
Published
2026-11-18
DOI
https://doi.org/10.4081/jae.2026.2193
Primary Topic
Granular flow and fluidized beds
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Discrete element modeling of bivalve Mactra veneriformis: parameter calibration and mechanized harvesting validation

Hangqi Li, Xiuchen Li, Gang Mu, Bin Xu et al.
Journal of Agricultural Engineering
Granular flow and fluidized beds
article

Discrete element modeling of bivalve Mactra veneriformis: parameter calibration and mechanized harvesting validation

Hangqi Li, Xiuchen Li, Gang Mu, Bin Xu, Yuzhong Lou, Guochen Zhang, Xiaodong Lv, Hao Wu
article en

Abstract

To reduce mudflat disturbance caused by hydraulic dredging and facilitate efficient, environmentally responsible mechanized harvesting of buried bivalves, this study aimed to develop an accurate discrete element method (DEM) model for analyzing Mactra veneriformis (M. veneriformis)–machine interactions and optimizing harvesting parameters. The geometry of M. veneriformis was reconstructed using three-dimensional scanning and represented in EDEM using a multi-sphere model. The Edinburgh elasto-plastic adhesion (EEPA) model was used to describe M. veneriformis–M. veneriformis interactions. Physical experiments were used to determine the static friction and restitution coefficients for M. veneriformis–stainless steel contacts and the restitution coefficient for M. veneriformis–M. veneriformis contacts, while DEM simulations were used to calibrate the remaining contact parameters. The angle of repose (AOR) was measured using the cylinder-lifting method and selected as the macroscopic response for DEM calibration. A Plackett–Burman design followed by a Box–Behnken design was used to screen and optimize the influential contact parameters. The rolling friction coefficient, static friction coefficient, and surface energy of M. veneriformis–M. veneriformis contacts were identified as the principal factors affecting the AOR. The optimized values were 0.05, 0.30, and 2 J m⁻², respectively. Using these parameters, the simulated AOR was 23.17°, with a relative error of 4.09% relative to the physical experiment. The calibrated model was subsequently applied to mechanized harvesting simulations and validated against field harvesting tests, reproducing the principal trends observed under field conditions. The validated DEM model provides a basis for analyzing M. veneriformis–machine interactions and optimizing mechanized harvesting systems, while the proposed modeling and calibration framework may also support DEM studies of other bivalves.

Journal of Agricultural Engineering
Dalian Ocean University (CN), Shenyang Agricultural University (CN), Harbin Engineering University (CN)
Granular flow and fluidized beds
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon