A Novel Bar-Tapered TSV Structure for Millimeter-Wave Applications with Enhanced Robustness to Sidewall Roughness
Low-loss, well-matched, and low-crosstalk vertical interconnects are increasingly required as 3D integrated microsystems extend to the mm-wave band and beyond. A bar-tapered through-silicon via (BT-TSV) is proposed for mm-wave applications, combining the flat sidewalls of a bar-shaped TSV with an axial taper. This geometry enlarges the effective signal-to-ground spacing, improves the high-frequency return path, and reduces input reflection, thereby reducing crosstalk and energy loss. To capture the etching-induced scalloped roughness, a flat-region conduction correction factor and an additional correction factor for internal inductance are introduced into the AC resistance and internal inductance, respectively, and an analytical model of the BT-TSV is developed. Under rough-sidewall conditions, the BT-TSV exhibits lower transmission loss, better transmission performance, and lower sensitivity to sidewall roughness than the cylindrical TSV (C-TSV), and the proposed model accurately captures the roughness-induced parasitic-parameter variations.
Authors
- Guangbao Shan (ORCID: https://orcid.org/0000-0002-9268-4870)
- Yintang Yang (ORCID: https://orcid.org/0000-0001-9745-5404)
- Shiyu Zhang (ORCID: https://orcid.org/0000-0002-9849-5122)
- Can Liu (ORCID: https://orcid.org/0000-0001-5247-963X)
- Xiaopeng Wu
- Bingxue Fu
- Fachuan Sun
Institutions
- Xidian University (CN)
Publication Details
- Journal
- Micromachines
- Published
- 2026-11-19
- DOI
- https://doi.org/10.3390/mi17111346
- Primary Topic
- 3D IC and TSV technologies
- Type
- article
- Field-Weighted Citation Impact
- 0.00