Superior anode efficiency and specific capacity of Mg–x (1, 4, 8wt.%) Li–1Ca magnesium-air battery anode: influence of anodic Mg2Ca and lithium

Alloying design is pivotal for overcoming the high polarization, severe self-corrosion, and chunk effect that limit the anode efficiency and specific capacity of magnesium anodes in Mg–air batteries. This study demonstrates the anode efficiency and specific capacity of the extruded Mg–4Li–1Ca (LX41) alloys, with a focus on the effect of lithium content (1, 4, and 8 wt.%) and the coexistence of dual anodic second phases (Mg₂Ca and β-Li). Among all compositions, the α –Mg–based LX41 alloy designates the highest anode efficiency of 72% and the highest specific capacity of 1542.02 mA·h·g −1 at a discharge current density of 20 mA·cm −2 . This superior performance is attributed to the optimized distribution of fine Mg 2 Ca particles, which possess a lower Volta potential than the α -Mg matrix and promote anodic activation without forming continuous corrosion pathways. Concurrently, a relatively intact discharge product layer (MgO, Mg(OH) 2 and CaCO 3 ) forms on the LX41 surface, effectively suppressing self-corrosion and stabilizing the discharge process. In contrast, LX 11 and LX81 suffer from a pronounce severe chunk effect driven by exfoliation corrosion, caused by the preferential dissolution of Mg 2 Ca and the Mg 2 Ca/ β -Li phase, respectively. Equilibrium calculations indicate that Li does not form insoluble products during dissolution. Instead, Li + diffuses into the electrolyte, thereby enhancing both the discharge potential and the diffusion kinetics of the anode material. Thus, the study takes an insight into the new interfacial diffusion mechanisms and offers a rational design strategy for high-performance Mg-air battery anodes.

Authors

Institutions

Publication Details

Journal
Journal of Magnesium and Alloys
Published
2026-11-19
DOI
https://doi.org/10.1016/j.jma.2026.102343
Primary Topic
Magnesium Alloys: Properties and Applications
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Superior anode efficiency and specific capacity of Mg–x (1, 4, 8wt.%) Li–1Ca magnesium-air battery anode: influence of anodic Mg2Ca and lithium

Darya Snihirova, Cheng‐Bao Liu, Lan‐Yue Cui, Weijiang Xue et al.
Journal of Magnesium and Alloys
Magnesium Alloys: Properties and Applications
article

Superior anode efficiency and specific capacity of Mg–x (1, 4, 8wt.%) Li–1Ca magnesium-air battery anode: influence of anodic Mg2Ca and lithium

Darya Snihirova, Cheng‐Bao Liu, Lan‐Yue Cui, Weijiang Xue, Rong‐Chang Zeng, Wei Xu, Yongqin Han, Mikhail L. Zheludkevich
article en

Abstract

Alloying design is pivotal for overcoming the high polarization, severe self-corrosion, and chunk effect that limit the anode efficiency and specific capacity of magnesium anodes in Mg–air batteries. This study demonstrates the anode efficiency and specific capacity of the extruded Mg–4Li–1Ca (LX41) alloys, with a focus on the effect of lithium content (1, 4, and 8 wt.%) and the coexistence of dual anodic second phases (Mg₂Ca and β-Li). Among all compositions, the α –Mg–based LX41 alloy designates the highest anode efficiency of 72% and the highest specific capacity of 1542.02 mA·h·g −1 at a discharge current density of 20 mA·cm −2 . This superior performance is attributed to the optimized distribution of fine Mg 2 Ca particles, which possess a lower Volta potential than the α -Mg matrix and promote anodic activation without forming continuous corrosion pathways. Concurrently, a relatively intact discharge product layer (MgO, Mg(OH) 2 and CaCO 3 ) forms on the LX41 surface, effectively suppressing self-corrosion and stabilizing the discharge process. In contrast, LX 11 and LX81 suffer from a pronounce severe chunk effect driven by exfoliation corrosion, caused by the preferential dissolution of Mg 2 Ca and the Mg 2 Ca/ β -Li phase, respectively. Equilibrium calculations indicate that Li does not form insoluble products during dissolution. Instead, Li + diffuses into the electrolyte, thereby enhancing both the discharge potential and the diffusion kinetics of the anode material. Thus, the study takes an insight into the new interfacial diffusion mechanisms and offers a rational design strategy for high-performance Mg-air battery anodes.

Journal of Magnesium and AlloysVol. 25
Helmholtz-Zentrum Hereon (DE), Shandong University of Science and Technology (CN), Xi'an Jiaotong University (CN)
Magnesium Alloys: Properties and Applications
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon