Synthesis and characterization of a poly-o-toluidine zirconium(IV) iodotungstate composite cation exchanger and its application to Zn(II)-selective binary separations

Zinc is an essential trace element, but its discharge above permissible limits from galvanizing, electroplating and related industries makes the selective separation of Zn(II) an important analytical and environmental task. The aim of this work was to prepare a polymeric–inorganic composite cation exchanger, poly-o-toluidine zirconium(IV) iodotungstate (POZIT), and to evaluate its ion-exchange behaviour and Zn(II) selectivity. POZIT was obtained by incorporating persulfate-polymerised o-toluidine into a zirconium(IV) iodotungstate gel (volume ratio KIO 3 :Na 2 WO 4 :ZrOCl 2 :o-toluidine:K 2 S 2 O 8 = 1:1:2:1:1, all 0.1 M) and was characterised by SEM, XRD, FTIR and TGA. XRD showed a predominantly amorphous (poorly crystalline) pattern with broad maxima at 2θ ≈ 26°, 33°, 52° and 63°, and TGA showed a residual mass of 69.2% at ~696 °C. The column-method exchange capacities for Na + , Ca 2+ , K + and Mg 2+ were 0.08, 0.16, 0.18 and 0.24 meq g −1 , respectively; pH titration indicated monofunctional weak-acid behaviour (0.16 meq g −1 for K + ), and the exchange capacity was largely retained up to 100 °C. Batch distribution coefficients of six metal ions in five media showed the highest affinity for Zn(II) (K d = 400, 500 and 470 mL g −1 in demineralised water, 0.1 M HNO 3 and 0.01 M HNO 3 ), corresponding to Zn(II)/M(II) separation factors of up to 51.7. On this basis, the binary separations Zn 2+ –Mg 2+ , Zn 2+ –Ca 2+ , Zn 2+ –Cd 2+ and Zn 2+ –Mn 2+ were achieved on POZIT columns with recoveries of 93–100%. Although its exchange capacity is modest compared with commercial resins, the pronounced Zn(II) selectivity makes POZIT a promising material for the selective separation, recovery and preconcentration of zinc, for example from Mg(II)/Ca(II)-rich process streams; its use for real wastewater requires further validation through isotherm, kinetic, column-breakthrough, regeneration and matrix studies.

Authors

Institutions

Publication Details

Journal
Next Materials
Published
2026-11-19
DOI
https://doi.org/10.1016/j.nxmate.2026.104098
Primary Topic
Chemical Synthesis and Characterization
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Synthesis and characterization of a poly-o-toluidine zirconium(IV) iodotungstate composite cation exchanger and its application to Zn(II)-selective binary separations

Zeeshan Ahamad, Alimuddin Alimuddin, Shahjahan, Nuzhat Fatama et al.
Next Materials
Chemical Synthesis and Characterization
article

Synthesis and characterization of a poly-o-toluidine zirconium(IV) iodotungstate composite cation exchanger and its application to Zn(II)-selective binary separations

Zeeshan Ahamad, Alimuddin Alimuddin, Shahjahan, Nuzhat Fatama, Salman A. Khan
article en

Abstract

Zinc is an essential trace element, but its discharge above permissible limits from galvanizing, electroplating and related industries makes the selective separation of Zn(II) an important analytical and environmental task. The aim of this work was to prepare a polymeric–inorganic composite cation exchanger, poly-o-toluidine zirconium(IV) iodotungstate (POZIT), and to evaluate its ion-exchange behaviour and Zn(II) selectivity. POZIT was obtained by incorporating persulfate-polymerised o-toluidine into a zirconium(IV) iodotungstate gel (volume ratio KIO 3 :Na 2 WO 4 :ZrOCl 2 :o-toluidine:K 2 S 2 O 8 = 1:1:2:1:1, all 0.1 M) and was characterised by SEM, XRD, FTIR and TGA. XRD showed a predominantly amorphous (poorly crystalline) pattern with broad maxima at 2θ ≈ 26°, 33°, 52° and 63°, and TGA showed a residual mass of 69.2% at ~696 °C. The column-method exchange capacities for Na + , Ca 2+ , K + and Mg 2+ were 0.08, 0.16, 0.18 and 0.24 meq g −1 , respectively; pH titration indicated monofunctional weak-acid behaviour (0.16 meq g −1 for K + ), and the exchange capacity was largely retained up to 100 °C. Batch distribution coefficients of six metal ions in five media showed the highest affinity for Zn(II) (K d = 400, 500 and 470 mL g −1 in demineralised water, 0.1 M HNO 3 and 0.01 M HNO 3 ), corresponding to Zn(II)/M(II) separation factors of up to 51.7. On this basis, the binary separations Zn 2+ –Mg 2+ , Zn 2+ –Ca 2+ , Zn 2+ –Cd 2+ and Zn 2+ –Mn 2+ were achieved on POZIT columns with recoveries of 93–100%. Although its exchange capacity is modest compared with commercial resins, the pronounced Zn(II) selectivity makes POZIT a promising material for the selective separation, recovery and preconcentration of zinc, for example from Mg(II)/Ca(II)-rich process streams; its use for real wastewater requires further validation through isotherm, kinetic, column-breakthrough, regeneration and matrix studies.

Next MaterialsVol. 14
Maulana Azad National Urdu University (IN), University of Malaya (MY)
Chemical Synthesis and Characterization
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon