Characterisation, Simulation and Optimisation of a Gridless LaB 6 Hollow Cathode DC Plasma Source for Plasma Ion Assisted Electron Beam Deposition of Optical Coatings

The Plasma Deposition Source (PDS) is a gridless source for Plasma Ion Assisted Deposition (PIAD) of electron beam evaporated optical coatings. PDS geometry, electrical and water-cooling feedthroughs provides a retrofittable configuration to most vacuum deposition chambers. PDS utilises an inductively heated (100kHz) LaB6 hot hollow cathode providing large surface area thermionic emission of a dc glow discharge at low deposition chamber vacuum pressure (typically 2 ×10 -4 mbar). The PDS incorporates a pressure differential between axially separated cathode and anode regions with typically 2 ×10 -3 mbar and 2 x10 -4 mbar pressures respectively, providing enhanced LaB6 hollow cathode performance, self sustaining plasma operation, reduced substrate heat loading and particulate contamination from the cathode. Retarding Field Energy Analyzer and Langmuir probe plasma diagnostic measurements and Monte Carlo simulation are described, used to characterise, optimise plasma output and establish fundamental understanding of PDS operation. PDS provides optimal ion energy range (5 to 50eV), and enhanced ion current density (~0.4mA/cm 2 at 90cm distance from the PDS to substrates) suitable for PIAD of densified amorphous optical thin films. Controllable PIAD over extended deposition area is achieved using a tunable magnetic field provided by a solenoid formed axially on the exterior of the anode assembly. Automated PDS control is described providing stable output of plasma ion energy and current density. PIAD of densified single TiO2 and SiO2 layers (typical deposition rates 0.6 and 0.7 nm/sec respectively) is demonstrated as a function of PDS parameters and plasma ion adatom arrival rate. Influence of the impinging plasma ions is shown to be a momentum transfer based thresholding process, where a minimum ion current density is required to achieve film densification with ion to deposited adatom ratio typically ≥1.2. Also PIAD of an eleven-layer TiO2/ SiO2 multilayer notch filter with no spectral drift over extended substrate deposition area is demonstrated.

Authors

Institutions

Publication Details

Journal
Journal of Physics D Applied Physics
Published
2026-11-19
DOI
https://doi.org/10.1088/1361-6463/aec45d
Primary Topic
Low-Pressure Plasma Processing and Diagnostics
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Characterisation, Simulation and Optimisation of a Gridless LaB 6 Hollow Cathode DC Plasma Source for Plasma Ion Assisted Electron Beam Deposition of Optical Coatings

毛念新, Des Gibson, Ian Brinkley, Connor Lindsay et al.
Journal of Physics D Applied Physics
Low-Pressure Plasma Processing and Diagnostics
article

Characterisation, Simulation and Optimisation of a Gridless LaB 6 Hollow Cathode DC Plasma Source for Plasma Ion Assisted Electron Beam Deposition of Optical Coatings

毛念新, Des Gibson, Ian Brinkley, Connor Lindsay, Caspar Clark
article en

Abstract

The Plasma Deposition Source (PDS) is a gridless source for Plasma Ion Assisted Deposition (PIAD) of electron beam evaporated optical coatings. PDS geometry, electrical and water-cooling feedthroughs provides a retrofittable configuration to most vacuum deposition chambers. PDS utilises an inductively heated (100kHz) LaB6 hot hollow cathode providing large surface area thermionic emission of a dc glow discharge at low deposition chamber vacuum pressure (typically 2 ×10 -4 mbar). The PDS incorporates a pressure differential between axially separated cathode and anode regions with typically 2 ×10 -3 mbar and 2 x10 -4 mbar pressures respectively, providing enhanced LaB6 hollow cathode performance, self sustaining plasma operation, reduced substrate heat loading and particulate contamination from the cathode. Retarding Field Energy Analyzer and Langmuir probe plasma diagnostic measurements and Monte Carlo simulation are described, used to characterise, optimise plasma output and establish fundamental understanding of PDS operation. PDS provides optimal ion energy range (5 to 50eV), and enhanced ion current density (~0.4mA/cm 2 at 90cm distance from the PDS to substrates) suitable for PIAD of densified amorphous optical thin films. Controllable PIAD over extended deposition area is achieved using a tunable magnetic field provided by a solenoid formed axially on the exterior of the anode assembly. Automated PDS control is described providing stable output of plasma ion energy and current density. PIAD of densified single TiO2 and SiO2 layers (typical deposition rates 0.6 and 0.7 nm/sec respectively) is demonstrated as a function of PDS parameters and plasma ion adatom arrival rate. Influence of the impinging plasma ions is shown to be a momentum transfer based thresholding process, where a minimum ion current density is required to achieve film densification with ion to deposited adatom ratio typically ≥1.2. Also PIAD of an eleven-layer TiO2/ SiO2 multilayer notch filter with no spectral drift over extended substrate deposition area is demonstrated.

Journal of Physics D Applied Physics
Helia Photonics (United Kingdom) (GB), University of the West of Scotland (GB)
Low-Pressure Plasma Processing and Diagnostics
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon