Effects of octadecanethiol coating on the mechanical properties, hydrophobicity and bacterial adhesion of soybean hull yarn

Soybean hull waste is a promising lignocellulosic feedstock for functional textiles, but yarn derived from it remains hydrophilic and prone to microbial adhesion. Whereas previous studies of octadecanethiol (ODT)-modified textiles primarily focused on conventional cotton or hybrid surface-modification systems, this study evaluated ODT-only modification of yarn produced from soybean hull waste. Spray-applied ODT coatings at concentrations of 10%, 20%, and 30% were investigated for their effects on the physicochemical and mechanical properties, surface morphology, wettability, and resistance to bacterial adhesion of soybean hull fiber yarn. Soybean hull fibers were chemically extracted, processed into yarn, spray-coatedcxs with ODT, and evaluated using compositional analysis, Fourier-transform infrared (FTIR) spectroscopy, density and surface-roughness measurements, tensile testing, X-ray diffraction (XRD), scanning electron microscopy (SEM), static water contact angle measurements, and qualitative observations of bacterial adhesion. As ODT concentration increased, density rose from 0.67 ± 0.019 to 1.16 ± 0.022 g/cm 3 , tensile strength increased from 81.20 to 129.75 MPa, and Young’s modulus increased from 5.40 to 10.15 GPa, while elongation decreased from 2.05% to 1.05%. Surface roughness decreased from 22.28 to 17.62 µm, and crystallinity increased from 12.3% to 55.2%. The static water contact angle increased from 55° for uncoated yarn to 72°, 98°, and 106° following treatment with 10%, 20%, and 30% ODT, respectively, indicating that hydrophobic behavior was achieved at ODT concentrations of 20% or higher. FTIR and SEM observations were consistent with increased alkyl-chain coverage and a more uniform surface morphology. Qualitative observations indicated reduced bacterial adhesion at higher ODT concentrations. These findings suggest that ODT spray coating could provide a straightforward approach to enhancing the tensile strength, stiffness, and hydrophobicity of soybean hull waste-derived yarn while potentially reducing bacterial adhesion.

Authors

Institutions

Publication Details

Journal
Discover Materials
Published
2026-11-19
DOI
https://doi.org/10.1007/s43939-026-01071-x
Primary Topic
Natural Fiber Reinforced Composites
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Effects of octadecanethiol coating on the mechanical properties, hydrophobicity and bacterial adhesion of soybean hull yarn

Willy Artha Wirawan, Aisyah Endah Palupi, Teguh Dwi Widodo, R.A. Ilyas et al.
Discover Materials
Natural Fiber Reinforced Composites
article

Effects of octadecanethiol coating on the mechanical properties, hydrophobicity and bacterial adhesion of soybean hull yarn

Willy Artha Wirawan, Aisyah Endah Palupi, Teguh Dwi Widodo, R.A. Ilyas, Arya Mahendra Sakti
article en

Abstract

Soybean hull waste is a promising lignocellulosic feedstock for functional textiles, but yarn derived from it remains hydrophilic and prone to microbial adhesion. Whereas previous studies of octadecanethiol (ODT)-modified textiles primarily focused on conventional cotton or hybrid surface-modification systems, this study evaluated ODT-only modification of yarn produced from soybean hull waste. Spray-applied ODT coatings at concentrations of 10%, 20%, and 30% were investigated for their effects on the physicochemical and mechanical properties, surface morphology, wettability, and resistance to bacterial adhesion of soybean hull fiber yarn. Soybean hull fibers were chemically extracted, processed into yarn, spray-coatedcxs with ODT, and evaluated using compositional analysis, Fourier-transform infrared (FTIR) spectroscopy, density and surface-roughness measurements, tensile testing, X-ray diffraction (XRD), scanning electron microscopy (SEM), static water contact angle measurements, and qualitative observations of bacterial adhesion. As ODT concentration increased, density rose from 0.67 ± 0.019 to 1.16 ± 0.022 g/cm 3 , tensile strength increased from 81.20 to 129.75 MPa, and Young’s modulus increased from 5.40 to 10.15 GPa, while elongation decreased from 2.05% to 1.05%. Surface roughness decreased from 22.28 to 17.62 µm, and crystallinity increased from 12.3% to 55.2%. The static water contact angle increased from 55° for uncoated yarn to 72°, 98°, and 106° following treatment with 10%, 20%, and 30% ODT, respectively, indicating that hydrophobic behavior was achieved at ODT concentrations of 20% or higher. FTIR and SEM observations were consistent with increased alkyl-chain coverage and a more uniform surface morphology. Qualitative observations indicated reduced bacterial adhesion at higher ODT concentrations. These findings suggest that ODT spray coating could provide a straightforward approach to enhancing the tensile strength, stiffness, and hydrophobicity of soybean hull waste-derived yarn while potentially reducing bacterial adhesion.

Discover Materials
University of Brawijaya (ID), Universitas Negeri Surabaya (ID), University of Technology Malaysia (MY)
Natural Fiber Reinforced Composites
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon