Polarization-Controlled MHz Burst-Mode Femtosecond Laser Slicing of n-Type 4H-SiC Wafers
This study demonstrates that linear polarization can tune the balance between separation load and surface height variation in MHz burst-mode femtosecond laser slicing of 4° off-axis n-type 4H-SiC. Four polarization angles were compared using dual-pulse bursts with an intraburst repetition rate of approximately 18 MHz under fixed incident-face, scanning, and burst conditions. Optical microscopy and scanning electron microscopy were used to characterize internal modification, local lateral crack extension, and crack paths spanning adjacent scan lines. Tensile separation tests and laser scanning confocal microscopy were performed to measure nominal separation stress and separated-surface topography, respectively. By distinguishing local crack extension from multi-line crack morphology, these findings show that local crack length alone does not explain separation behavior and suggest contributions from crack-path continuity and residual connections.
Authors
- Chung‐Wei Cheng (ORCID: https://orcid.org/0000-0002-9994-0670)
- Jia-Fan Kuo
- Kai-Chieh Hsu
Institutions
- National Yang Ming Chiao Tung University (TW)
Publication Details
- Journal
- Research Square
- Published
- 2026-11-19
- DOI
- https://doi.org/10.21203/rs.3.rs-11560860/v1
- Primary Topic
- Laser Material Processing Techniques
- Type
- preprint