Screening of Single-Atom Catalysts for Na2S-Mediated Pre-Sodiation and Interfacial Rejuvenation in Low N/P Ratio Sodium Batteries

The pursuit of higher energy and power densities in sodium-ion batteries (SIBs) is constrained by the trade-off between multielectron faradaic reaction kinetics and interfacial stability. Here, we develop a catalyst-mediated presodiation and interfacial rejuvenation strategy to address the low initial Coulombic efficiency of hard carbon (HC) anodes and transition-metal (TM) dissolution from high-voltage polyanionic and layered oxide cathodes in ampere-hour-scale pouch cells. Moving beyond empirical catalyst selection, we establish a rational screening framework for transition-metal single-atom sites based on electronic coupling and geometric compatibility with Na2S. Atomically dispersed Co (SA-Co) emerges as the preferred catalyst, reducing the Na2S decomposition potential to 3.49 V. An SA-Co/Na2S@C functional layer enables precise sodium-inventory compensation and simultaneous interfacial rejuvenation. Unlike conventional blended additives, sulfur-derived polysulfides suppress TM crossover and support high-voltage operation up to 4.5 V, while replenished sodium compensates irreversible HC losses and stabilizes the solid-electrolyte interphase. Coupling an SA-Co/Na2S@C-coated Na3V2(PO4)3 (NVP) cathode (18 mg cm–2) with an HC anode under lean-sodium and lean-electrolyte conditions (N/P ratio = 0.4; E/C ratio = 1.2 g Ah1–) yields a 1.1 Ah pouch cell retaining 97.2% capacity after 200 cycles, with gravimetric and volumetric energy densities of 317 Wh kg–1 and 485 Wh L–1, respectively, and a maximum power density of 831 W kg–1. Compatible with existing electrode manufacturing, this scalable interfacial approach offers a practical pathway toward high-energy, high-power SIBs.

Authors

Institutions

Publication Details

Journal
ACS Nano
Published
2026-11-19
DOI
https://doi.org/10.1021/acsnano.6c14733
Primary Topic
Advancements in Battery Materials
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Screening of Single-Atom Catalysts for Na2S-Mediated Pre-Sodiation and Interfacial Rejuvenation in Low N/P Ratio Sodium Batteries

Yue Ma, Peiyu Zhao, Tongshuai Wang, Ahu Shao et al.
ACS Nano
Advancements in Battery Materials
article

Screening of Single-Atom Catalysts for Na2S-Mediated Pre-Sodiation and Interfacial Rejuvenation in Low N/P Ratio Sodium Batteries

Yue Ma, Peiyu Zhao, Tongshuai Wang, Ahu Shao, Wenzhuo Tan, Junyu Zhang, Peiwen Fan, Chunwei Li, Jiacheng Liu, Yisheng Hu, Jiawen Tang
article en

Abstract

The pursuit of higher energy and power densities in sodium-ion batteries (SIBs) is constrained by the trade-off between multielectron faradaic reaction kinetics and interfacial stability. Here, we develop a catalyst-mediated presodiation and interfacial rejuvenation strategy to address the low initial Coulombic efficiency of hard carbon (HC) anodes and transition-metal (TM) dissolution from high-voltage polyanionic and layered oxide cathodes in ampere-hour-scale pouch cells. Moving beyond empirical catalyst selection, we establish a rational screening framework for transition-metal single-atom sites based on electronic coupling and geometric compatibility with Na2S. Atomically dispersed Co (SA-Co) emerges as the preferred catalyst, reducing the Na2S decomposition potential to 3.49 V. An SA-Co/Na2S@C functional layer enables precise sodium-inventory compensation and simultaneous interfacial rejuvenation. Unlike conventional blended additives, sulfur-derived polysulfides suppress TM crossover and support high-voltage operation up to 4.5 V, while replenished sodium compensates irreversible HC losses and stabilizes the solid-electrolyte interphase. Coupling an SA-Co/Na2S@C-coated Na3V2(PO4)3 (NVP) cathode (18 mg cm–2) with an HC anode under lean-sodium and lean-electrolyte conditions (N/P ratio = 0.4; E/C ratio = 1.2 g Ah1–) yields a 1.1 Ah pouch cell retaining 97.2% capacity after 200 cycles, with gravimetric and volumetric energy densities of 317 Wh kg–1 and 485 Wh L–1, respectively, and a maximum power density of 831 W kg–1. Compatible with existing electrode manufacturing, this scalable interfacial approach offers a practical pathway toward high-energy, high-power SIBs.

ACS Nano
Northwestern Polytechnical University (CN)
Advancements in Battery Materials
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon