Effects of Boron-Based Impregnation Systems and Silicate-Based Resin on the Mechanical Properties of Fresh and Aged Scots Pine and Crimean Pine Wood

This study comparatively investigated the effects of disodium octaborate tetrahydrate (DOT) and silicate-modified resin impregnation systems on the physical and mechanical properties of fresh and naturally aged (historical) Crimean pine (Pinus nigra Arnold) and Scots pine (Pinus sylvestris L.). Wood specimens were treated with aqueous DOT solutions at concentrations of 5%, 10%, and 15% (w/v), either alone or in combination with silicate-modified resin. Air-dry density, modulus of rupture (MOR), modulus of elasticity (MOE), and compression strength parallel to the grain were evaluated. Statistical analyses revealed significant effects of wood type and impregnation formulation on the investigated properties (p < 0.001). Historical pine specimens generally exhibited lower bending and compressive strength than fresh specimens, whereas historical Crimean pine retained a relatively high MOE (10,290.97 N/mm2) compared with fresh Crimean pine (9809.54 N/mm2). Impregnation treatments increased mean air-dry density from 0.496 g/cm3 in untreated specimens to 0.600 g/cm3 with R-DOT 15, corresponding to an increase of approximately 21.0%. Resin-containing treatments significantly improved bending performance compared with untreated and DOT-only specimens. The R-DOT 5 formulation exhibited the highest numerical MOR (109.56 N/mm2) and MOE (12,427.25 N/mm2), representing increases of 44.9% and 41.8%, respectively, compared with untreated controls. However, no statistically significant differences were observed among resin-containing formulations, indicating that DOT addition did not provide a distinguishable additional improvement in bending performance compared with resin treatment alone. The highest mean compression strength was also recorded for R-DOT 5 (41.44 N/mm2), corresponding to a 20.6% increase over the untreated control (34.36 N/mm2). A significant interaction between wood type and impregnation formulation was observed for compression strength (p = 0.021), indicating species-dependent treatment responses. Overall, the findings demonstrate the potential of silicate-modified resin-based treatments to improve the mechanical performance of fresh and historical pine wood, providing experimental evidence relevant to developing wood-strengthening strategies for architectural conservation.

Authors

Institutions

Publication Details

Journal
Coatings
Published
2026-11-19
DOI
https://doi.org/10.3390/coatings16111378
Primary Topic
Wood Treatment and Properties
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Effects of Boron-Based Impregnation Systems and Silicate-Based Resin on the Mechanical Properties of Fresh and Aged Scots Pine and Crimean Pine Wood

Mehmet İNCEOĞLU, Onur Ülker, Hacı İsmail Kesik, Betül Gelengül Eki̇mci̇ et al.
Coatings
Wood Treatment and Properties
article

Effects of Boron-Based Impregnation Systems and Silicate-Based Resin on the Mechanical Properties of Fresh and Aged Scots Pine and Crimean Pine Wood

Mehmet İNCEOĞLU, Onur Ülker, Hacı İsmail Kesik, Betül Gelengül Eki̇mci̇, Halil Ibrahim Karagoz
article en

Abstract

This study comparatively investigated the effects of disodium octaborate tetrahydrate (DOT) and silicate-modified resin impregnation systems on the physical and mechanical properties of fresh and naturally aged (historical) Crimean pine (Pinus nigra Arnold) and Scots pine (Pinus sylvestris L.). Wood specimens were treated with aqueous DOT solutions at concentrations of 5%, 10%, and 15% (w/v), either alone or in combination with silicate-modified resin. Air-dry density, modulus of rupture (MOR), modulus of elasticity (MOE), and compression strength parallel to the grain were evaluated. Statistical analyses revealed significant effects of wood type and impregnation formulation on the investigated properties (p < 0.001). Historical pine specimens generally exhibited lower bending and compressive strength than fresh specimens, whereas historical Crimean pine retained a relatively high MOE (10,290.97 N/mm2) compared with fresh Crimean pine (9809.54 N/mm2). Impregnation treatments increased mean air-dry density from 0.496 g/cm3 in untreated specimens to 0.600 g/cm3 with R-DOT 15, corresponding to an increase of approximately 21.0%. Resin-containing treatments significantly improved bending performance compared with untreated and DOT-only specimens. The R-DOT 5 formulation exhibited the highest numerical MOR (109.56 N/mm2) and MOE (12,427.25 N/mm2), representing increases of 44.9% and 41.8%, respectively, compared with untreated controls. However, no statistically significant differences were observed among resin-containing formulations, indicating that DOT addition did not provide a distinguishable additional improvement in bending performance compared with resin treatment alone. The highest mean compression strength was also recorded for R-DOT 5 (41.44 N/mm2), corresponding to a 20.6% increase over the untreated control (34.36 N/mm2). A significant interaction between wood type and impregnation formulation was observed for compression strength (p = 0.021), indicating species-dependent treatment responses. Overall, the findings demonstrate the potential of silicate-modified resin-based treatments to improve the mechanical performance of fresh and historical pine wood, providing experimental evidence relevant to developing wood-strengthening strategies for architectural conservation.

CoatingsVol. 16(11)
Eskisehir Technical University (TR), Gazi University (TR)
Wood Treatment and Properties
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon