Mechanical Property Test and Numerical Analysis of the Sealing Material between the Lining Plates of the Assembled Channel

In cross-basin water conveyance channel projects in cold and arid areas, solving frost heaving damage is a key issue. Large-scale prefabricated water conveyance structures can be effectively controlled, and the performance of interplate sealing materials is the key to determining whether leakage occurs. This study examines the mechanical properties of sealing materials used between lining plates of prefabricated channels through physical tests on both the sealing materials and composite members under freeze–thaw cycling conditions. A comprehensive performance loss retention rate ( R ) is proposed as an evaluation index for material performance. There were several key results. First, in our study of sealant materials, after nine freeze–thaw cycles, the flexural capacity of silicone rubber sealant (SR) decreased by 30.13%, its compressive modulus decreased by 44.5%, and its tensile strength decreased by 25.3%. Polysulfide sealant (PS) and polyurethane sealant (PU) also exhibited degradation, whereas modified silane sealant (MS) showed the least reduction in flexural and tensile strength, with decreases of only 10.12% and 6.7%, respectively. Second, in our study of the microscopic mechanism, we found that freezing causes localized shrinkage in the materials and a reduction in pore structure. However, after nine freeze–thaw cycles, the number of large-pore structures increased, while that of small-pore structures decreased. The proportions of pores with a Feret diameter less than 5 μm in SR, MS, PS, and PU were 3.28%, 2.45%, 3.3%, and 4.26%, respectively. Third, in the analysis on composite members, bending tests found that the strength loss of SR material was 75.04%, while MS exhibited the smallest loss at 32.02%. In compression tests, however, SR showed the least modulus attenuation. In tensile tests, MS material demonstrated the highest bonding strength, with only a 25.4% decrease—the smallest among the materials—and an R -value as high as 81.41%. Finally, we conducted numerical simulation, where the mutual contact model of soil lining was introduced, and the corresponding physical model test was established. It is found that the numerical test results are larger than the actual test results, but the simulation results are basically consistent with the physical test results. The comprehensive comparison shows that the MS material performs best among the four sealant materials.

Authors

Institutions

Publication Details

Journal
Journal of Materials in Civil Engineering
Published
2026-11-19
DOI
https://doi.org/10.1061/jmcee7.mteng-24612
Primary Topic
Civil and Structural Engineering Research
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Mechanical Property Test and Numerical Analysis of the Sealing Material between the Lining Plates of the Assembled Channel

Zhe Wang, Lingkai Zhang, Hui Cheng
Journal of Materials in Civil Engineering
Civil and Structural Engineering Research
article

Mechanical Property Test and Numerical Analysis of the Sealing Material between the Lining Plates of the Assembled Channel

Zhe Wang, Lingkai Zhang, Hui Cheng
article en

Abstract

In cross-basin water conveyance channel projects in cold and arid areas, solving frost heaving damage is a key issue. Large-scale prefabricated water conveyance structures can be effectively controlled, and the performance of interplate sealing materials is the key to determining whether leakage occurs. This study examines the mechanical properties of sealing materials used between lining plates of prefabricated channels through physical tests on both the sealing materials and composite members under freeze–thaw cycling conditions. A comprehensive performance loss retention rate ( R ) is proposed as an evaluation index for material performance. There were several key results. First, in our study of sealant materials, after nine freeze–thaw cycles, the flexural capacity of silicone rubber sealant (SR) decreased by 30.13%, its compressive modulus decreased by 44.5%, and its tensile strength decreased by 25.3%. Polysulfide sealant (PS) and polyurethane sealant (PU) also exhibited degradation, whereas modified silane sealant (MS) showed the least reduction in flexural and tensile strength, with decreases of only 10.12% and 6.7%, respectively. Second, in our study of the microscopic mechanism, we found that freezing causes localized shrinkage in the materials and a reduction in pore structure. However, after nine freeze–thaw cycles, the number of large-pore structures increased, while that of small-pore structures decreased. The proportions of pores with a Feret diameter less than 5 μm in SR, MS, PS, and PU were 3.28%, 2.45%, 3.3%, and 4.26%, respectively. Third, in the analysis on composite members, bending tests found that the strength loss of SR material was 75.04%, while MS exhibited the smallest loss at 32.02%. In compression tests, however, SR showed the least modulus attenuation. In tensile tests, MS material demonstrated the highest bonding strength, with only a 25.4% decrease—the smallest among the materials—and an R -value as high as 81.41%. Finally, we conducted numerical simulation, where the mutual contact model of soil lining was introduced, and the corresponding physical model test was established. It is found that the numerical test results are larger than the actual test results, but the simulation results are basically consistent with the physical test results. The comprehensive comparison shows that the MS material performs best among the four sealant materials.

Journal of Materials in Civil EngineeringVol. 39(4)
Xinjiang Agricultural University (CN), Xinjiang Institute of Water Resources and Hydropower Research (CN)
Civil and Structural Engineering Research
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon