Effects of Preparation Design, Fabrication Technique, and Cementation on the Internal Fit and Marginal Adaptation of Porcelain Laminate Veneers: A Micro-CT Study

Background This study aimed to evaluate the effects of preparation design, fabrication technique, and cementation on the marginal adaptation and internal fit of porcelain laminate veneers (PLVs) using micro-computed tomography (micro-CT). Methods Sixty-four extracted human maxillary central incisors were randomly assigned to eight groups (n = 8) according to preparation design (overlap or bevel), fabrication technique (CAD/CAM or heat-pressing), and resin cement (Variolink Veneer or Clearfil Esthetic Cement EX). PLVs were fabricated using the CEREC CAD/CAM system or the IPS Empress Esthetic heat-pressing technique. Micro-CT (Sky Scan 1172, Bruker) scans were obtained before and after cementation. Marginal adaptation and internal fit were assessed at predefined measurement points in transverse and sagittal sections, yielding 95 measurements per specimen. Data were analyzed using nonparametric statistical tests, with statistical significance set at p < 0.05. Results CAD/CAM-fabricated PLVs generally exhibited lower marginal gap values than heat-pressed PLVs (p < 0.05). The bevel preparation design was generally associated with lower marginal gap values than the overlap design (p < 0.05), whereas differences in internal fit between preparation designs were less evident. Cementation did not significantly affect most marginal and internal fit measurements (p > 005). However, significant changes were observed at selected measurement locations in some groups. The effects of cementation were therefore location- and group-dependent. Conclusions Within the limitations of this in vitro study, fabrication technique and preparation design influenced the marginal adaptation of PLVs. CAD/CAM fabrication and bevel preparation may provide more favorable marginal adaptation. Cementation had limited effects on marginal adaptation and internal fit.

Authors

Institutions

Publication Details

Journal
Research Square
Published
2026-11-19
DOI
https://doi.org/10.21203/rs.3.rs-11353496/v1
Primary Topic
Dental materials and restorations
Type
preprint
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
preprint

Effects of Preparation Design, Fabrication Technique, and Cementation on the Internal Fit and Marginal Adaptation of Porcelain Laminate Veneers: A Micro-CT Study

Meral Arslan Malkoç, Feyza Telli Civitci
Research Square
Dental materials and restorations
preprint

Effects of Preparation Design, Fabrication Technique, and Cementation on the Internal Fit and Marginal Adaptation of Porcelain Laminate Veneers: A Micro-CT Study

Meral Arslan Malkoç, Feyza Telli Civitci
preprint en

Abstract

Background This study aimed to evaluate the effects of preparation design, fabrication technique, and cementation on the marginal adaptation and internal fit of porcelain laminate veneers (PLVs) using micro-computed tomography (micro-CT). Methods Sixty-four extracted human maxillary central incisors were randomly assigned to eight groups (n = 8) according to preparation design (overlap or bevel), fabrication technique (CAD/CAM or heat-pressing), and resin cement (Variolink Veneer or Clearfil Esthetic Cement EX). PLVs were fabricated using the CEREC CAD/CAM system or the IPS Empress Esthetic heat-pressing technique. Micro-CT (Sky Scan 1172, Bruker) scans were obtained before and after cementation. Marginal adaptation and internal fit were assessed at predefined measurement points in transverse and sagittal sections, yielding 95 measurements per specimen. Data were analyzed using nonparametric statistical tests, with statistical significance set at p < 0.05. Results CAD/CAM-fabricated PLVs generally exhibited lower marginal gap values than heat-pressed PLVs (p < 0.05). The bevel preparation design was generally associated with lower marginal gap values than the overlap design (p < 0.05), whereas differences in internal fit between preparation designs were less evident. Cementation did not significantly affect most marginal and internal fit measurements (p > 005). However, significant changes were observed at selected measurement locations in some groups. The effects of cementation were therefore location- and group-dependent. Conclusions Within the limitations of this in vitro study, fabrication technique and preparation design influenced the marginal adaptation of PLVs. CAD/CAM fabrication and bevel preparation may provide more favorable marginal adaptation. Cementation had limited effects on marginal adaptation and internal fit.

Research Square
Akdeniz University (TR)
Dental materials and restorations
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon