Self-healing digital twins for fault-tolerant building energy management: a physics-informed hybrid architecture with an exploratory pilot demonstration
Purpose This study develops a self-healing digital-twin architecture for fault-tolerant building energy management in which anomaly detection is linked directly to control recovery. Design/methodology/approach A two-state RC thermal model, identified online by recursive least squares as an ARX approximation, is combined with an LSTM residual corrector. The hybrid-model residual drives a nine-state fault detection, isolation and recovery (FDIR) machine that reconfigures a stochastic model predictive controller (MPC). The architecture was tested in an eight-week residential pilot with 50 software-emulated faults and in a virtual hardware-in-the-loop test. Findings The architecture ran on a Raspberry Pi 4 (maximum MPC solve time 4.21 s). In the summary results of the original pilot analysis, 40 of 43 emulated non-cyber faults were correctly classified (93.0%; 95% CI 80.9–98.5%). As the original logs and data partitions were not retained, these results are descriptive, not held-out estimates. Research limitations/implications The evidence comes from one building and emulated faults and cannot be independently re-analysed; comfort is assessed with a model-based PMV estimate. A prospective study with pre-specified data partitions is required. Practical implications The design shows how diagnostic outputs can trigger explicit controller reconfiguration on low-cost edge hardware without redundant sensors. Originality/value The paper specifies an architecture that couples a hybrid digital twin, residual-driven FDIR and stochastic MPC in one control loop, and states transparently which parts of its pilot evidence can and cannot be verified.
Authors
- Anastasios Tsiakalos
- Apostolos Tsiakalos (ORCID: https://orcid.org/0009-0003-0256-9196)
Institutions
- Aristotle University of Thessaloniki (GR)
- University of Western Macedonia (GR)
Publication Details
- Journal
- Smart and Sustainable Built Environment
- Published
- 2026-11-20
- DOI
- https://doi.org/10.1108/sasbe-06-2026-0592
- Primary Topic
- Building Energy and Comfort Optimization
- Type
- article
- Field-Weighted Citation Impact
- 0.00