Effect of Low Temperatures and Drilled Hole Diameters on Flexural Properties and Failure Mechanisms of 3D Angle‐Interlock Woven Drilled Hole Composites

This study systematically investigates the flexural behavior of three‐dimensional angle‐interlock woven drilled‐hole composites (3DAWDHC) under low‐temperature conditions. Three 3DAWDHC architectures, namely through‐angle interlocking (TI), shallow‐cross bending (SB), and shallow‐cross straight (SS), were fabricated and subjected to three‐point bending tests over a temperature range of −60°C to 20°C and drilled hole diameters of 0–6 mm. The effects of temperature and hole diameter on peak load, flexural strength, and flexural modulus were quantitatively evaluated. The results demonstrate that both temperature and hole diameter significantly regulate the flexural properties of 3DAWDHC in opposite manners. Taking the TI structure as a representative, flexural strength and flexural modulus increase by 14.6% and 44.0%, respectively, when temperature decreases from 20°C to −60°C, relative to the room‐temperature non‐drilled baseline. By contrast, when the drilled hole diameter increases from 0 to 6 mm at 20°C, flexural strength and flexural modulus decrease by 22.8% and 28.9%, respectively. Regarding failure characteristics, lower temperatures aggravate matrix embrittlement and induce more severe brittle fracture, while larger drilled holes reduce the macroscopic failure area but deepen crack propagation along the thickness direction. These findings provide fundamental data and design guidance for 3D woven joint structures serving in cryogenic aerospace environments.

Authors

Institutions

Publication Details

Journal
Polymer Composites
Published
2026-11-18
DOI
https://doi.org/10.1002/pc.71895
Primary Topic
Mechanical Behavior of Composites
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Effect of Low Temperatures and Drilled Hole Diameters on Flexural Properties and Failure Mechanisms of 3D Angle‐Interlock Woven Drilled Hole Composites

Yang Liu, Yiwei Ouyang, Xiaozhou Gong, Duyan Zhang et al.
Polymer Composites
Mechanical Behavior of Composites
article

Effect of Low Temperatures and Drilled Hole Diameters on Flexural Properties and Failure Mechanisms of 3D Angle‐Interlock Woven Drilled Hole Composites

Yang Liu, Yiwei Ouyang, Xiaozhou Gong, Duyan Zhang, Ying Chai, Yiran Han, Xiaoke Huang, Xiaonan Wang, Yi Ren, Xin Sun
article en

Abstract

This study systematically investigates the flexural behavior of three‐dimensional angle‐interlock woven drilled‐hole composites (3DAWDHC) under low‐temperature conditions. Three 3DAWDHC architectures, namely through‐angle interlocking (TI), shallow‐cross bending (SB), and shallow‐cross straight (SS), were fabricated and subjected to three‐point bending tests over a temperature range of −60°C to 20°C and drilled hole diameters of 0–6 mm. The effects of temperature and hole diameter on peak load, flexural strength, and flexural modulus were quantitatively evaluated. The results demonstrate that both temperature and hole diameter significantly regulate the flexural properties of 3DAWDHC in opposite manners. Taking the TI structure as a representative, flexural strength and flexural modulus increase by 14.6% and 44.0%, respectively, when temperature decreases from 20°C to −60°C, relative to the room‐temperature non‐drilled baseline. By contrast, when the drilled hole diameter increases from 0 to 6 mm at 20°C, flexural strength and flexural modulus decrease by 22.8% and 28.9%, respectively. Regarding failure characteristics, lower temperatures aggravate matrix embrittlement and induce more severe brittle fracture, while larger drilled holes reduce the macroscopic failure area but deepen crack propagation along the thickness direction. These findings provide fundamental data and design guidance for 3D woven joint structures serving in cryogenic aerospace environments.

Polymer Composites
Wuhan Textile University (CN)
Mechanical Behavior of Composites
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon