A High-Fidelity Time-Domain Model of Plunge Centerless Grinding with Exact Wheel–Workpiece Intersection, Contact Compliance and Modal Machine Dynamics
Workpiece roundness in plunge centerless grinding results from the interplay between the self-centering geometry of the work-rest blade and regulating wheel, the grinding force, the wheel–workpiece contact compliance and the machine structural dynamics. This paper presents a high-fidelity (HiFi) time-domain model that describes these phenomena with a level of detail suitable for process digital twins. The workpiece is represented as a radial z-buffer, and material removal is computed from the exact geometric intersection between each z-buffer ray and the grinding wheel, computed analytically by the law of sines. The normal grinding force combines a volumetric (chip-formation) and an edge (rubbing) component, while a local contact stiffness reduces the actual depth of cut with respect to the nominal interference. The relative wheel–workpiece dynamics are described by a modal model with an arbitrary number of modes, integrated with an implicit trapezoidal (Newmark average-acceleration) scheme whose step is locked to the angular resolution of the z-buffer. At every step, the nonlinear equilibrium among geometry, force and structural deflection is solved numerically. The model has been implemented in an open-source Python package and validated against 267 plunge-grinding tests performed on an industrial machine, starting from the measured initial profiles. The analysis of the measured profiles revealed a systematic imprint of the grinding wheel rotation, which was included in the model as a wheel run-out term. With this term, the predicted dominant lobe order matched the measured one in 64% of the tests with a dominant harmonic amplitude above 1 µm, and the simulated roundness correlated with the measured one (r=0.64, mean absolute error 1.0 μm), while the amplitude of the dominant lobes was generally underestimated. The scatter between repeated tests is of the same order as the model error, and a sensitivity analysis shows that, among the model parameters, only the wheel run-out significantly affects the lobe amplitude. Limitations and possible extensions of the model are discussed.
Authors
- Giacomo Bianchi (ORCID: https://orcid.org/0000-0002-4330-9468)
- Marco Leonesio (ORCID: https://orcid.org/0000-0001-6671-5058)
Institutions
- National Research Council (IT)
- Institute of Intelligent Industrial Systems and Technologies for Advanced Manufacturing (IT)
Publication Details
- Journal
- Machines
- Published
- 2026-11-19
- DOI
- https://doi.org/10.3390/machines14111383
- Primary Topic
- Advanced machining processes and optimization
- Type
- article
- Field-Weighted Citation Impact
- 0.00