Direction-Aware Timing Modeling for Reinforcement-Learning-Based Clock Arrival Time Optimization in Power-Integrity-Aware Physical Design

Dynamic IR-drop induced by large-scale synchronous register switching has become a critical power-integrity challenge in modern high-performance ICs. Highly balanced clock networks can trigger simultaneous switching, causing transient current surges, localized voltage drops, timing-margin loss, and potential functional failures. Existing clock-skew and Clock Arrival Time (CAT) optimization methods mitigate this issue by expanding CAT distributions to desynchronize register switching, but recent reinforcement-learning-based approaches often rely on aggregated TNS-only timing observations, which obscure the directional timing impact of CAT perturbations. This work proposes Direction-Aware Timing Modeling (DATM) for reinforcement-learning-based CAT optimization. DATM explicitly separates launch-side and capture-side timing behaviors, resolving the directional ambiguity of TNS-only formulations and enabling the agent to better infer how CAT adjustments affect timing. The proposed framework is evaluated on seven 28nm designs with diverse timing and structural characteristics. Results show that DATM achieves substantially larger CAT-distribution expansion than the evaluated baselines while maintaining stable setup timing. A comprehensive timing-surrogate audit quantifies model fidelity, and CAT-transfer analysis shows that physical implementation preserves CAT ordering while attenuating target amplitude. Industrial validation with ICC2 and RedHawk further demonstrates an average peak-current reduction of 50.57% and dynamic IR-drop hotspot reduction, with limited timing degradation and average total-area and total-power overheads of 9.33% and 8.63%, respectively. These results establish DATM as a practical EDA method for power-integrity-aware physical design.

Authors

Institutions

Publication Details

Journal
ACM Transactions on Design Automation of Electronic Systems
Published
2026-11-19
DOI
https://doi.org/10.1145/3864457
Primary Topic
VLSI and FPGA Design Techniques
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Direction-Aware Timing Modeling for Reinforcement-Learning-Based Clock Arrival Time Optimization in Power-Integrity-Aware Physical Design

Guorui Feng, Hailuan Liu, Cankun HUANG, Jiangxia Deng et al.
ACM Transactions on Design Automation of Electronic Systems
VLSI and FPGA Design Techniques
article

Direction-Aware Timing Modeling for Reinforcement-Learning-Based Clock Arrival Time Optimization in Power-Integrity-Aware Physical Design

Guorui Feng, Hailuan Liu, Cankun HUANG, Jiangxia Deng, Lingyan Fan
article en

Abstract

Dynamic IR-drop induced by large-scale synchronous register switching has become a critical power-integrity challenge in modern high-performance ICs. Highly balanced clock networks can trigger simultaneous switching, causing transient current surges, localized voltage drops, timing-margin loss, and potential functional failures. Existing clock-skew and Clock Arrival Time (CAT) optimization methods mitigate this issue by expanding CAT distributions to desynchronize register switching, but recent reinforcement-learning-based approaches often rely on aggregated TNS-only timing observations, which obscure the directional timing impact of CAT perturbations. This work proposes Direction-Aware Timing Modeling (DATM) for reinforcement-learning-based CAT optimization. DATM explicitly separates launch-side and capture-side timing behaviors, resolving the directional ambiguity of TNS-only formulations and enabling the agent to better infer how CAT adjustments affect timing. The proposed framework is evaluated on seven 28nm designs with diverse timing and structural characteristics. Results show that DATM achieves substantially larger CAT-distribution expansion than the evaluated baselines while maintaining stable setup timing. A comprehensive timing-surrogate audit quantifies model fidelity, and CAT-transfer analysis shows that physical implementation preserves CAT ordering while attenuating target amplitude. Industrial validation with ICC2 and RedHawk further demonstrates an average peak-current reduction of 50.57% and dynamic IR-drop hotspot reduction, with limited timing degradation and average total-area and total-power overheads of 9.33% and 8.63%, respectively. These results establish DATM as a practical EDA method for power-integrity-aware physical design.

ACM Transactions on Design Automation of Electronic Systems
Shanghai University (CN), Hangzhou Dianzi University (CN)
VLSI and FPGA Design Techniques
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon