On reaction dynamics and ion composition in capacitive Ar/Cl2 discharges
The plasma chemistry of the capacitive Ar/Cl2 discharge is explored, using particle-in-cell Monte Carlo collision simulations, as the Cl2 fraction in the feedstock (0%–99%) and pressure (10–50 Pa) are varied. Increasing the Cl2 fraction in the feedstock shifts the dominating ion from Ar+ to Cl2+, while the Cl+ ion has smaller presence. The relative reaction rates for the creation and loss of various key species are compared over the above-mentioned parameter range. For the low Cl2 fraction in the feedstock, the Cl2+ ion is mainly created through Penning ionization, but with increased Cl2 fraction, electron-impact ionization takes over as the dominating process, while Cl2+ ions are lost predominantly due to flux to the electrodes. The Cl− ion is created through dissociative attachment and lost through ion-ion recombination, with Ar+ ions at low Cl2 fractions and Cl2+ ions at high Cl2 fractions in the feedstock. The ion energy and angular distributions were collected at the grounded electrode. For all the cases, the Cl2+ and Cl+ ions exhibit a high energy bimodal peak accompanied by increasing population of low-energy ions, which appear as several smaller peaks in the low-energy part of the spectrum, as the pressure is increased. At low Cl2 fractions in the feedstock, the Ar+ ions are mainly concentrated at low ion energies, in particular, at higher pressures.
Authors
- Jón Tómas Guðmundsson (ORCID: https://orcid.org/0000-0002-8153-3209)
- B. Mahdavipour (ORCID: https://orcid.org/0000-0001-8647-2946)
Institutions
- University of Iceland (IS)
- KTH Royal Institute of Technology (SE)
Publication Details
- Journal
- Journal of Vacuum Science & Technology A Vacuum Surfaces and Films
- Published
- 2026-11-19
- DOI
- https://doi.org/10.1116/6.0005830
- Primary Topic
- Low-Pressure Plasma Processing and Diagnostics
- Type
- article
- Field-Weighted Citation Impact
- 0.00