Preparation and performance study of cement–emulsified asphalt grout
To address the high brittleness, shrinkage cracking, and insufficient durability of conventional road grouting materials, this study developed a high-fluidity, toughened cement–emulsified asphalt grout (CAG) incorporating fly ash, silica fume, and functional admixtures. An orthogonal experimental design was used to investigate the effects of eight mix design factors on workability and mechanical properties and to optimize the formulation. The water-to-binder ratio, silica fume content, fly ash content, and asphalt-to-binder ratio were the main factors affecting workability and strength development. The optimized mix exhibited high fluidity and good volumetric stability, with a compressive-to-flexural strength ratio of 3.69 at 28 days, suggesting reduced brittleness. Microscopic analysis showed that calcium silicate hydrate (C–S–H) gel filled pores in the matrix and formed a dense interpenetrating network with the asphalt films formed during demulsification. This microstructure may contribute to improved toughness and interfacial adhesion. The measured properties met the requirements of the applicable standards for pavement void grouting, supporting the use of CAG in this application.
Authors
- ZiFan Sui
- Defang Yue
- Xudong Zha (ORCID: https://orcid.org/0000-0001-8408-2071)
- 唐伟
- Chengzhi Wu
Publication Details
- Journal
- Figshare
- Published
- 2026-11-19
- DOI
- https://doi.org/10.6084/m9.figshare.35056447
- Primary Topic
- Concrete and Cement Materials Research
- Type
- article
- Field-Weighted Citation Impact
- 0.00