Response Surface Modelling and Optimization of Pineapple Leaf Fiber Reinforced Epoxy Composites Using Fiber Length and Loading

The demand for sustainable materials has started to draw the attention of engineers and researchers toward natural fiber composites. Pineapple fruit crop is a ratoon crop, and pineapple leaves are generated as an agricultural residue during cultivation and harvesting. The fiber generated from this residue pineapple leaves become an alternative for the managing this crop waste and to generate ecofriendly product. The present study includes the composite specimen fabrication of total 40 experimental framework using different combination pineapple fiber length (FL) and fiber content (FC) as a reinforcing elements and epoxy polymer as a reinforcement constituent. Further these specimens are experimentally evaluated using the ASTM standards to find out mechanical response in terms of tensile strength (TS), flexural strength (FS) and impact strength (IS) properties. The mechanical response of PLAF reinforced polymer composite depends upon the material variables such as FL and FC. The present research proposes a quadratic response surface-based regression model which is fitted to 40 runs for 5 x 8 full factorial data sets, for predicting multi-response optimization of the material variables. This research also includes determination of the statistical adequacy of the proposed model and surface and interaction analysis of the material variables. The quadratic response surface-based regression model predicted compromise region at a fiber length of 22.6 mm and fiber proportion of 31.3 wt% with predicted mechanical response of tensile, flexural and impact strength of 48.91 MPa, 72.72 MPa and 6.51 kJ/m² respectively. In comparision experimental analysis represents that composite sample PF 29 with FL of 20 and FC of 30 wt% exhibits highest values of TS, FS and IS of 56.75 MPa, 87.85 MPa and 7.84 kJ/m², respectively. The developed quadratic response surface-based regression model exhibited coefficients of determination (R²) for TS, FS and IS of 0.8869, 0.8816 and 0.8571 respectively, with corresponding adjusted R² values of 0.8703, 0.8642 and 0.8360. The extremely low p-values (p< 0.05) of 3.997 × 10⁻¹⁵, 8.549 × 10⁻¹⁵ and 2.048 × 10⁻¹³ for tensile, flexural and impact performance respectively show that quadratic regression models are statistically significant.

Authors

Institutions

Publication Details

Journal
Research Square
Published
2026-11-19
DOI
https://doi.org/10.21203/rs.3.rs-11328007/v1
Primary Topic
Natural Fiber Reinforced Composites
Type
preprint
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
preprint

Response Surface Modelling and Optimization of Pineapple Leaf Fiber Reinforced Epoxy Composites Using Fiber Length and Loading

Priyanka Potghan, Shashi Chandra Sharma, Vishal Wankhade, Rajeev Sharma et al.
Research Square
Natural Fiber Reinforced Composites
preprint

Response Surface Modelling and Optimization of Pineapple Leaf Fiber Reinforced Epoxy Composites Using Fiber Length and Loading

Priyanka Potghan, Shashi Chandra Sharma, Vishal Wankhade, Rajeev Sharma, Manoj Sharma
preprint en

Abstract

The demand for sustainable materials has started to draw the attention of engineers and researchers toward natural fiber composites. Pineapple fruit crop is a ratoon crop, and pineapple leaves are generated as an agricultural residue during cultivation and harvesting. The fiber generated from this residue pineapple leaves become an alternative for the managing this crop waste and to generate ecofriendly product. The present study includes the composite specimen fabrication of total 40 experimental framework using different combination pineapple fiber length (FL) and fiber content (FC) as a reinforcing elements and epoxy polymer as a reinforcement constituent. Further these specimens are experimentally evaluated using the ASTM standards to find out mechanical response in terms of tensile strength (TS), flexural strength (FS) and impact strength (IS) properties. The mechanical response of PLAF reinforced polymer composite depends upon the material variables such as FL and FC. The present research proposes a quadratic response surface-based regression model which is fitted to 40 runs for 5 x 8 full factorial data sets, for predicting multi-response optimization of the material variables. This research also includes determination of the statistical adequacy of the proposed model and surface and interaction analysis of the material variables. The quadratic response surface-based regression model predicted compromise region at a fiber length of 22.6 mm and fiber proportion of 31.3 wt% with predicted mechanical response of tensile, flexural and impact strength of 48.91 MPa, 72.72 MPa and 6.51 kJ/m² respectively. In comparision experimental analysis represents that composite sample PF 29 with FL of 20 and FC of 30 wt% exhibits highest values of TS, FS and IS of 56.75 MPa, 87.85 MPa and 7.84 kJ/m², respectively. The developed quadratic response surface-based regression model exhibited coefficients of determination (R²) for TS, FS and IS of 0.8869, 0.8816 and 0.8571 respectively, with corresponding adjusted R² values of 0.8703, 0.8642 and 0.8360. The extremely low p-values (p< 0.05) of 3.997 × 10⁻¹⁵, 8.549 × 10⁻¹⁵ and 2.048 × 10⁻¹³ for tensile, flexural and impact performance respectively show that quadratic regression models are statistically significant.

Research Square
Alexandria Higher Institute of Engineering and Technology (EG), Amity University Jaipur (IN)
Natural Fiber Reinforced Composites
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon