Start-Capacitor Switching and Supply-Frequency Selection in an Inverter-Fed Capacitor-Start Capacitor-Run Single-Phase Induction Motor Drive

Inverter-fed capacitor-start capacitor-run (CSCR) single-phase induction motors often run at reduced speed, yet start-capacitor switching and supply-frequency selection are rarely studied together. This simulation study examines a 1.2 kVA CSCR motor fed by a unipolar sinusoidal pulse-width-modulated full-bridge inverter with an LC filter and controlled by a proportional-integral (PI) speed loop, optional cascaded voltage and inductor-current PI loops, and look-up-table (LUT) frequency selection. At 3 N·m, the fixed 1125 rpm threshold leaves the start capacitor connected at 800–1000 rpm, raising the input power to 723–1244 W and the auxiliary-winding copper loss to 7–13 times its 50 Hz value. Frequency-dependent or time-delayed disconnection reduces the input power by 44–65% (still at least 32% with realistic capacitor resistances or ±20% motor-parameter changes). A power balance shows that a simple loss model captures only 18–31% of the motor losses in this state. With the capacitor disconnected, the LUT, a model-based frequency assignment, and perturb-and-observe searches yield input powers within 1% of one another and 6.6–10.1% below constant volts-per-hertz control at 3 N·m. The inner PI loops lower the voltage total harmonic distortion 2.7–7.0 times without changing the estimated losses. Capacitor switching and frequency selection should thus be designed together.

Authors

Institutions

Publication Details

Journal
Electronics
Published
2026-11-19
DOI
https://doi.org/10.3390/electronics15225397
Primary Topic
Electric Motor Design and Analysis
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Start-Capacitor Switching and Supply-Frequency Selection in an Inverter-Fed Capacitor-Start Capacitor-Run Single-Phase Induction Motor Drive

Qamil Kabashi, Taulant Shala
Electronics
Electric Motor Design and Analysis
article

Start-Capacitor Switching and Supply-Frequency Selection in an Inverter-Fed Capacitor-Start Capacitor-Run Single-Phase Induction Motor Drive

Qamil Kabashi, Taulant Shala
article en

Abstract

Inverter-fed capacitor-start capacitor-run (CSCR) single-phase induction motors often run at reduced speed, yet start-capacitor switching and supply-frequency selection are rarely studied together. This simulation study examines a 1.2 kVA CSCR motor fed by a unipolar sinusoidal pulse-width-modulated full-bridge inverter with an LC filter and controlled by a proportional-integral (PI) speed loop, optional cascaded voltage and inductor-current PI loops, and look-up-table (LUT) frequency selection. At 3 N·m, the fixed 1125 rpm threshold leaves the start capacitor connected at 800–1000 rpm, raising the input power to 723–1244 W and the auxiliary-winding copper loss to 7–13 times its 50 Hz value. Frequency-dependent or time-delayed disconnection reduces the input power by 44–65% (still at least 32% with realistic capacitor resistances or ±20% motor-parameter changes). A power balance shows that a simple loss model captures only 18–31% of the motor losses in this state. With the capacitor disconnected, the LUT, a model-based frequency assignment, and perturb-and-observe searches yield input powers within 1% of one another and 6.6–10.1% below constant volts-per-hertz control at 3 N·m. The inner PI loops lower the voltage total harmonic distortion 2.7–7.0 times without changing the estimated losses. Capacitor switching and frequency selection should thus be designed together.

ElectronicsVol. 15(22)
University of Prishtina (XK)
Electric Motor Design and Analysis
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon