Characterization and study of the phase composition and photocatalytic properties of titanium dioxide particles after annealing

Purpose is to study of the influence of annealing titanium dioxide powder particles in air on its size and phase composition, photocatalytic properties. Methods . Using atomic force microscopy, the morphology and size composition of the particles before and after annealing at 800°C were studied. X-ray diffraction was used to perform phase analysis of unannealed and annealed titanium dioxide particles, and their coherent scattering regions and crystal lattice parameters a and c were calculated using the Rietveld method. Spectrophotometry was used to determine the dependence of the photocatalytic activity of titanium dioxide powder particles on annealing temperature. Results. The morphology of titanium dioxide powder particles was determined to be characterized by a predominantly rounded shape. The average quantitative lateral dimensions in the unannealed and annealed samples were calculated to be (76,69±0,2) nm and (147,1±0,2) nm, respectively. Based on the results of phase analysis and calculation of the crystal lattice parameters a and c, it was found that after thermal exposure to 800°С on titanium dioxide powder particles, the anatase phase is preserved, but the sizes of the coherent scattering regions of the particles decrease, which is possibly due to the onset of the transition to the rutile phase. The greatest decrease in the residual concentration of methylene blue was obtained for the unannealed sample of titanium dioxide particles, and the smallest for the annealed sample at 800°С, indicating a decrease in the photocatalytic activity of the particles due to their agglomeration and the onset of the phase transition after annealing. Conclusion. The results of the studies presented in this paper indicate that high-temperature annealing increases the average quantitative lateral particle sizes, possibly triggering a transformation of the titanium dioxide crystal structure from anatase to rutile, and reduces the photocatalytic activity of the particles. These findings may be relevant for developing a method for producing titanium dioxide particles with controlled photocatalytic properties through annealing.

Authors

Publication Details

Journal
Proceedings of the Southwest State University Series Engineering and Technologies
Published
2026-11-18
DOI
https://doi.org/10.21869/2223-1528-2026-16-3-114-126
Primary Topic
TiO2 Photocatalysis and Solar Cells
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Characterization and study of the phase composition and photocatalytic properties of titanium dioxide particles after annealing

Vladimir Alexandrovich Mamontov, А. В. Кочура, M. V. Tsukanova, V. A. Bulgakova et al.
Proceedings of the Southwest State University Series Engineering and Technologies
TiO2 Photocatalysis and Solar Cells
article

Characterization and study of the phase composition and photocatalytic properties of titanium dioxide particles after annealing

Vladimir Alexandrovich Mamontov, А. В. Кочура, M. V. Tsukanova, V. A. Bulgakova, A. A. Botalova
article en

Abstract

Purpose is to study of the influence of annealing titanium dioxide powder particles in air on its size and phase composition, photocatalytic properties. Methods . Using atomic force microscopy, the morphology and size composition of the particles before and after annealing at 800°C were studied. X-ray diffraction was used to perform phase analysis of unannealed and annealed titanium dioxide particles, and their coherent scattering regions and crystal lattice parameters a and c were calculated using the Rietveld method. Spectrophotometry was used to determine the dependence of the photocatalytic activity of titanium dioxide powder particles on annealing temperature. Results. The morphology of titanium dioxide powder particles was determined to be characterized by a predominantly rounded shape. The average quantitative lateral dimensions in the unannealed and annealed samples were calculated to be (76,69±0,2) nm and (147,1±0,2) nm, respectively. Based on the results of phase analysis and calculation of the crystal lattice parameters a and c, it was found that after thermal exposure to 800°С on titanium dioxide powder particles, the anatase phase is preserved, but the sizes of the coherent scattering regions of the particles decrease, which is possibly due to the onset of the transition to the rutile phase. The greatest decrease in the residual concentration of methylene blue was obtained for the unannealed sample of titanium dioxide particles, and the smallest for the annealed sample at 800°С, indicating a decrease in the photocatalytic activity of the particles due to their agglomeration and the onset of the phase transition after annealing. Conclusion. The results of the studies presented in this paper indicate that high-temperature annealing increases the average quantitative lateral particle sizes, possibly triggering a transformation of the titanium dioxide crystal structure from anatase to rutile, and reduces the photocatalytic activity of the particles. These findings may be relevant for developing a method for producing titanium dioxide particles with controlled photocatalytic properties through annealing.

Proceedings of the Southwest State University Series Engineering and TechnologiesVol. 16(3)
TiO2 Photocatalysis and Solar Cells
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon