On the Dzhanibekov Effect, the solar cycle, the perihelion precession of Mercury, and the quadrupole moment of the Sun

An analysis of the effect of the solar quadrupole moment, J2, on the precession of Mercury and the behavior of its orbit is presented within the context of the liquid metallic hydrogen solar model, LMHSM (see P.M. Robitaille, Forty Lines of Evidence for Condensed Matter - The Sun on Trial: Liquid Metallic Hydrogen as a Solar Building Block, Progress in Physics, 2013, v. 4, 90-142). The solar core is considered to possess three separate moments of inertia (I1 <I2 <I3). and rotation begins along I2 which is aligned along the z axis of the Sun. This result in core inversion through the Dhzanibekov efffect every 11 years, thereby fully accounting for the solar cycle within the context of the Liquid Metallic Hydrogen Solar Model. Parameters for the solar core include a radius of 0.65R⊙ and an average density of 1.7 g/cm3. The convective zone extends from 0.65R⊙ to R⊙with an average density of 1.3 g/cm3. The moment of inertia is therefore∼6 times greater for the convective zone than for the core. The effect of the thin photosphere is neglected. The selection of exact values for these two regions does not alter final conclusions, provided that the core rotates as a completely rigid and perfect sphere such that (I1 + I2 + I3 = 3Icore). In this case, J2 = (I2−(I1 + I3))/(M⊙R2 ⊙) and C22 = (I3−I1)/(4M⊙R2 ⊙). The convective zone is used to perfectly mask the effect of C22 from the core (C22,net = C22,core + C22,conv). The value of C22,net and should remain less than 2.8 ×10−10 at all times. The convective zone acts as a phase-locked mechanical counterweight (ϕconv. = ϕcore + 90◦) that continuously redistributes mass in step with the core’s rotation without locking its spin. This keeps the regions of lower mass in the convective zone canceling the regions of higher mass found in the core. The convective zone mass compensation is accomplished by placing elements heavier than hydrogen within intercalate regions between the Type II hexagonal planes (see J.C. Robitaille and P.M. Robitaille, Liquid Metallic Hydrogen III. Intercalation and Lattice Exclusion Versus Gravitational Settling and Their Consequences Relative to Internal Structure, Surface Activity, and Solar Winds in the Sun, Progress in Physics 2013, v. 2, 87-97). Note that Type II hexagonal planar metallic hydrogen is considered fully metallic with all its electrons completely delocalized. This is unlike the semi-metallic Type I material found in the photosphere. This material should possess zero interlayer shear modulus (µ⊥ = 0 ), thereby enabling the core to rotate freely. Such a conclusion is reasonable based on the anticipated presence of extremely weak or essentially non-existent London forces between planes in Type II metallic hydrogen. Conversely, the hexagonal planar arrangement of Type II metallic hydrogen must display considerable in-plane stiffness (µ∥ >0), as would be expected for such a material. Thus, the Sun appear as an axisymmetric ellipsoid relative to Mercury, even though the solar core actually contains three distinct moments of inertia. Consequently, no effect of solar core inversion can be detected at Mercury and it is possibleto completely account for the solar cycle without any need for a solar dynamo.

Authors

Publication Details

Journal
Zenodo (CERN European Organization for Nuclear Research)
Published
2026-11-19
DOI
https://doi.org/10.5281/zenodo.24371564
Primary Topic
Solar and Space Plasma Dynamics
Type
preprint
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
preprint

On the Dzhanibekov Effect, the solar cycle, the perihelion precession of Mercury, and the quadrupole moment of the Sun

Stephen J. Crothers, Pierre-Marie Robitaille, Floriano R. Pohlmann
Zenodo (CERN European Organization for Nuclear Research)
Solar and Space Plasma Dynamics
preprint

On the Dzhanibekov Effect, the solar cycle, the perihelion precession of Mercury, and the quadrupole moment of the Sun

Stephen J. Crothers, Pierre-Marie Robitaille, Floriano R. Pohlmann
preprint en

Abstract

An analysis of the effect of the solar quadrupole moment, J2, on the precession of Mercury and the behavior of its orbit is presented within the context of the liquid metallic hydrogen solar model, LMHSM (see P.M. Robitaille, Forty Lines of Evidence for Condensed Matter - The Sun on Trial: Liquid Metallic Hydrogen as a Solar Building Block, Progress in Physics, 2013, v. 4, 90-142). The solar core is considered to possess three separate moments of inertia (I1 <I2 <I3). and rotation begins along I2 which is aligned along the z axis of the Sun. This result in core inversion through the Dhzanibekov efffect every 11 years, thereby fully accounting for the solar cycle within the context of the Liquid Metallic Hydrogen Solar Model. Parameters for the solar core include a radius of 0.65R⊙ and an average density of 1.7 g/cm3. The convective zone extends from 0.65R⊙ to R⊙with an average density of 1.3 g/cm3. The moment of inertia is therefore∼6 times greater for the convective zone than for the core. The effect of the thin photosphere is neglected. The selection of exact values for these two regions does not alter final conclusions, provided that the core rotates as a completely rigid and perfect sphere such that (I1 + I2 + I3 = 3Icore). In this case, J2 = (I2−(I1 + I3))/(M⊙R2 ⊙) and C22 = (I3−I1)/(4M⊙R2 ⊙). The convective zone is used to perfectly mask the effect of C22 from the core (C22,net = C22,core + C22,conv). The value of C22,net and should remain less than 2.8 ×10−10 at all times. The convective zone acts as a phase-locked mechanical counterweight (ϕconv. = ϕcore + 90◦) that continuously redistributes mass in step with the core’s rotation without locking its spin. This keeps the regions of lower mass in the convective zone canceling the regions of higher mass found in the core. The convective zone mass compensation is accomplished by placing elements heavier than hydrogen within intercalate regions between the Type II hexagonal planes (see J.C. Robitaille and P.M. Robitaille, Liquid Metallic Hydrogen III. Intercalation and Lattice Exclusion Versus Gravitational Settling and Their Consequences Relative to Internal Structure, Surface Activity, and Solar Winds in the Sun, Progress in Physics 2013, v. 2, 87-97). Note that Type II hexagonal planar metallic hydrogen is considered fully metallic with all its electrons completely delocalized. This is unlike the semi-metallic Type I material found in the photosphere. This material should possess zero interlayer shear modulus (µ⊥ = 0 ), thereby enabling the core to rotate freely. Such a conclusion is reasonable based on the anticipated presence of extremely weak or essentially non-existent London forces between planes in Type II metallic hydrogen. Conversely, the hexagonal planar arrangement of Type II metallic hydrogen must display considerable in-plane stiffness (µ∥ >0), as would be expected for such a material. Thus, the Sun appear as an axisymmetric ellipsoid relative to Mercury, even though the solar core actually contains three distinct moments of inertia. Consequently, no effect of solar core inversion can be detected at Mercury and it is possibleto completely account for the solar cycle without any need for a solar dynamo.

Zenodo (CERN European Organization for Nuclear Research)
Solar and Space Plasma Dynamics
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon