Temperature and grain boundary dependent tensile behavior of 90Mg-5Zn-5Al alloy: a molecular dynamics study

Purpose The purpose of this paper is to systematically investigate the combined effects of temperature and grain boundary structure on the uniaxial tensile behavior of 90Mg-5Zn-5Al (at.%) alloy using molecular dynamics simulations. Design/methodology/approach A single-crystal model and three Voronoi-tessellated polycrystalline models containing 10, 15, and 20 randomly oriented grains (P10, P15, and P20) were constructed, with 5 at.% Al and 5 at.% Zn atoms randomly distributed within the HCP-Mg matrix. The models were subjected to uniaxial tensile loading in the range of 300–500 K. Stress-strain behavior, Young’s modulus, yield and tensile strength, strain hardening, local structural change, and dislocation activity were analyzed. Findings The single-crystal structure exhibited the highest strength at all temperatures. Tensile strength decreased by approximately 20%, from 2.39 GPa at 300 K to 1.88 GPa at 500 K. A similar decrease was observed in polycrystalline models. Polycrystalline structures exhibited more heterogeneous plastic deformation due to grain-boundary-related disorder. Dislocation Extraction Algorithm (DXA) analyses revealed that pre-existing grain-boundary-related line content in the polycrystalline models, whereas the single-crystal model contained no DXA-detected dislocations before loading and exhibited a temperature-dependent onset of dislocation activity. Tensile deformation reduced the hexagonal close-packed fraction and increased the amount of Face-Centred Cubic-like local stacking associated with defect-induced structural rearrangements. Originality/value This study establishes an atomistic structure-property relationship linking grain boundary structure, dislocation evolution, and local structural rearrangements to the temperature-dependent tensile response of 90Mg-5Zn-5Al alloy and represents one of the first systematic molecular dynamics investigations considering both temperature and grain boundary effects in this alloy.

Authors

Institutions

Publication Details

Journal
Multidiscipline Modeling in Materials and Structures
Published
2026-11-20
DOI
https://doi.org/10.1108/mmms-08-2026-0335
Primary Topic
Microstructure and mechanical properties
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Temperature and grain boundary dependent tensile behavior of 90Mg-5Zn-5Al alloy: a molecular dynamics study

Bahadır Furkan KINACI, ISMAIL I. ESEN, Harun Çuğ, Mehmet Akif Erden et al.
Multidiscipline Modeling in Materials and Structures
Microstructure and mechanical properties
article

Temperature and grain boundary dependent tensile behavior of 90Mg-5Zn-5Al alloy: a molecular dynamics study

Bahadır Furkan KINACI, ISMAIL I. ESEN, Harun Çuğ, Mehmet Akif Erden, Eyyüp Taşkaya
article en

Abstract

Purpose The purpose of this paper is to systematically investigate the combined effects of temperature and grain boundary structure on the uniaxial tensile behavior of 90Mg-5Zn-5Al (at.%) alloy using molecular dynamics simulations. Design/methodology/approach A single-crystal model and three Voronoi-tessellated polycrystalline models containing 10, 15, and 20 randomly oriented grains (P10, P15, and P20) were constructed, with 5 at.% Al and 5 at.% Zn atoms randomly distributed within the HCP-Mg matrix. The models were subjected to uniaxial tensile loading in the range of 300–500 K. Stress-strain behavior, Young’s modulus, yield and tensile strength, strain hardening, local structural change, and dislocation activity were analyzed. Findings The single-crystal structure exhibited the highest strength at all temperatures. Tensile strength decreased by approximately 20%, from 2.39 GPa at 300 K to 1.88 GPa at 500 K. A similar decrease was observed in polycrystalline models. Polycrystalline structures exhibited more heterogeneous plastic deformation due to grain-boundary-related disorder. Dislocation Extraction Algorithm (DXA) analyses revealed that pre-existing grain-boundary-related line content in the polycrystalline models, whereas the single-crystal model contained no DXA-detected dislocations before loading and exhibited a temperature-dependent onset of dislocation activity. Tensile deformation reduced the hexagonal close-packed fraction and increased the amount of Face-Centred Cubic-like local stacking associated with defect-induced structural rearrangements. Originality/value This study establishes an atomistic structure-property relationship linking grain boundary structure, dislocation evolution, and local structural rearrangements to the temperature-dependent tensile response of 90Mg-5Zn-5Al alloy and represents one of the first systematic molecular dynamics investigations considering both temperature and grain boundary effects in this alloy.

Multidiscipline Modeling in Materials and Structures
Karabük University (TR)
Microstructure and mechanical properties
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon