Prediction and Reliability Analysis of Slope Stability Under Orebody Mining at the Bottom of High and Steep Open-Pit Slope

Scientific and rational design of underground stope parameters is the key to realizing safe and efficient extraction of orebodies in the stress concentration zone at the open-pit slope bottom of a copper mine in Sichuan Province. The stope span w, the slope isolation layer thickness d, the stope height h and the backfill cement–sand ratio r were selected as the influencing factors for slope stability. Based on the Box–Behnken design of response surface methodology, numerical simulation tests were conducted using FLAC3D software 7.0. Analysis of variance (ANOVA) and regression fitting analysis were performed on the response values of 29 groups of simulation tests, and a quadratic regression prediction model was established and validated for its predictive capability. The above four parameters were regarded as random variables, and the stope parameter design system was evaluated according to reliability theory. The results indicate that the four influencing factors exhibit a high fitting degree with the response value F, and the established quadratic regression model presents a favorable correlation with the test data, with considerable consistency between experimental results and model prediction values. The significance order of each factor affecting slope stability is consistent with the corresponding sensitivity ranking. In the reliability analysis, the reliability index β equals 2.547, and the failure probability Pf equals 0.5429%. This demonstrates that the combination of random variable values within the current research range has a high probability of satisfying the specification requirements, and the scheme possesses good robustness under conventional construction deviations. The small relative error between model predictions and engineering verification results verifies that the research findings can provide a reliable theoretical reference and practical guidance for stope parameter optimization during orebody mining at the slope bottom of high and steep open-pit slopes.

Authors

Institutions

Publication Details

Journal
Eng—Advances in Engineering
Published
2026-11-19
DOI
https://doi.org/10.3390/eng7110659
Primary Topic
Geotechnical Engineering and Analysis
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Prediction and Reliability Analysis of Slope Stability Under Orebody Mining at the Bottom of High and Steep Open-Pit Slope

LI Guangtao, Jinhui Sun, Zhonghua Ruan, Dehong Feng et al.
Eng—Advances in Engineering
Geotechnical Engineering and Analysis
article

Prediction and Reliability Analysis of Slope Stability Under Orebody Mining at the Bottom of High and Steep Open-Pit Slope

LI Guangtao, Jinhui Sun, Zhonghua Ruan, Dehong Feng, Yang Chen, Xu Wu, Yunhao Wang
article en

Abstract

Scientific and rational design of underground stope parameters is the key to realizing safe and efficient extraction of orebodies in the stress concentration zone at the open-pit slope bottom of a copper mine in Sichuan Province. The stope span w, the slope isolation layer thickness d, the stope height h and the backfill cement–sand ratio r were selected as the influencing factors for slope stability. Based on the Box–Behnken design of response surface methodology, numerical simulation tests were conducted using FLAC3D software 7.0. Analysis of variance (ANOVA) and regression fitting analysis were performed on the response values of 29 groups of simulation tests, and a quadratic regression prediction model was established and validated for its predictive capability. The above four parameters were regarded as random variables, and the stope parameter design system was evaluated according to reliability theory. The results indicate that the four influencing factors exhibit a high fitting degree with the response value F, and the established quadratic regression model presents a favorable correlation with the test data, with considerable consistency between experimental results and model prediction values. The significance order of each factor affecting slope stability is consistent with the corresponding sensitivity ranking. In the reliability analysis, the reliability index β equals 2.547, and the failure probability Pf equals 0.5429%. This demonstrates that the combination of random variable values within the current research range has a high probability of satisfying the specification requirements, and the scheme possesses good robustness under conventional construction deviations. The small relative error between model predictions and engineering verification results verifies that the research findings can provide a reliable theoretical reference and practical guidance for stope parameter optimization during orebody mining at the slope bottom of high and steep open-pit slopes.

Eng—Advances in EngineeringVol. 7(11)
Kunming University of Science and Technology (CN), Kunming Metallurgical Research Institute (CN)
Geotechnical Engineering and Analysis
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon