Effect of Shielding Gas Purity on Microstructure and Strain-Rate-Dependent Tensile Behavior of GTAW CP-Ti Welds
This study investigated the influence of shielding gas purity on the microstructure and strain-rate-dependent tensile behavior of gas-tungsten-arc-welded commercially pure titanium Grade 2 joints. Two argon grades were compared: ultra-high-purity (UHP, 99.999%) and high-purity (HP, 99.997%). UHP shielding achieved full penetration at ~9.5% lower heat input, producing a narrower welded region. Welding transformed the fine, weakly textured base metal into coarser, moderately textured heat-affected zones and strongly textured lamellar/acicular fusion zones. HP shielding produced higher fusion-zone hardness, potentially associated with interstitial strengthening. All tensile specimens fractured within the heat-affected zone, while UHP shielding resulted in higher strength, elongation, and strain-rate sensitivity. Welding altered both the magnitude and strain evolution of strain-rate sensitivity, consistent with the combined influence of grain structure, crystallographic texture, and deformation mechanisms involving slip and twinning.
Authors
- Daolun L. Chen (ORCID: https://orcid.org/0000-0003-3420-3626)
- Enrique A. López-Baltazar (ORCID: https://orcid.org/0000-0001-9792-7141)
- Francisco Alvarado-Hernández (ORCID: https://orcid.org/0000-0002-8344-6379)
- Victor Hugo Baltazar-Hernandez (ORCID: https://orcid.org/0000-0001-8629-9936)
- Ana B. Salazar-Zapata (ORCID: https://orcid.org/0009-0008-5540-6864)
Institutions
- Universidad Autónoma de Zacatecas "Francisco García Salinas" (MX)
- Toronto Metropolitan University (CA)
Publication Details
- Journal
- Materials
- Published
- 2026-11-19
- DOI
- https://doi.org/10.3390/ma19224899
- Primary Topic
- Welding Techniques and Residual Stresses
- Type
- article
- Field-Weighted Citation Impact
- 0.00